Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Z Cleanroom Apron (em inglês)
A lightweight low-lint cleanroom apron providing targeted front-torso and leg coverage with adjustable ties.
- Shin-length low-lint front coverage
- Adjustable neck and waist ties
- Disposable or reusable material options
Introdução do produto
The Cleanroom Apron is a simple over-garment for tasks that need additional front-surface coverage without a full garment change. Its one-piece bib, smooth front panel, adjustable neck loop and long waist ties minimize hardware and allow quick donning. White flash-spun polyethylene, film-coated material or reusable polyester can be selected to suit handling and processing needs.
Características-chave
Shin-length format extends coverage below the workbench edge
Adjustable neck loop accommodates different operator heights
Long waist ties secure the apron without exposed metal hardware
Smooth pocket-free surface simplifies controlled handling
Preocupações do produto do cliente
An apron provides partial rather than full-body coverage. Material selection, gown overlap and disposal or laundering procedures must therefore match the actual task and the base garment worn underneath.
A short apron may leave the lower torso or upper legs exposed.Select shin-length coverage and suitable width for the operator and work posture.
Fixed neck dimensions can place the bib too high or low.Use an adjustable neck loop and long rear waist ties for controlled positioning.
Pockets and bulky fasteners can trap residues and particles.Specify a smooth pocket-free front with minimal seam count and no exposed hardware.
The apron material may not match the intended splash or ESD requirement.Choose the exact nonwoven, film-coated or conductive polyester construction based on task data.
Aplicações típicas
Used for controlled dispensing, clean packing, laboratory preparation, equipment wipe-down, visitor protection and other front-facing tasks where local gowning rules permit partial over-garment coverage.
Parâmetros técnicos
These configurable dimensions describe a cleanroom apron, not a full protective garment. Final material and coverage must be selected after reviewing the base gowning system and process exposure.
| Material principal | Flash-spun polyethylene, low-lint film or continuous-filament polyester |
|---|---|
| Painel de espessura | 0.14–0.35 mm |
| Largura efetiva | 650–900 mm |
| Comprimento máximo | 1250 mm |
| Aço enfrentando espessura | 0 mm; no steel facing used |
| Densidade Core | 45–125 kg/m³ apparent material bulk density |
| Condutividade térmica | 0.035–0.060 W/(m·K), material dependent |
| Superfície acabado | Smooth low-lint white or light-blue surface without pockets |
| Tipo conjunto | One-piece front panel with sewn or bonded neck and waist ties |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
White disposable nonwoven or reusable polyesterSleeveless bib or long-sleeve apronAdjustable neck loop or snap-adjusted neck strapRear ties or low-profile buckle systemConductive-grid polyester optionIndividual or bulk clean packaging
Planning a Cleanroom Apron specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
