Cleanroom apron shin-length three-quarter front product view

클린룸 의류, PPE 및 소모품

클린 룸 앞치마

A lightweight low-lint cleanroom apron providing targeted front-torso and leg coverage with adjustable ties.

Shin-length low-lint front coverage
Adjustable neck and waist ties
Disposable or reusable material options

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Apron is a simple over-garment for tasks that need additional front-surface coverage without a full garment change. Its one-piece bib, smooth front panel, adjustable neck loop and long waist ties minimize hardware and allow quick donning. White flash-spun polyethylene, film-coated material or reusable polyester can be selected to suit handling and processing needs.

주요 기능

One-piece bib and skirt reduce front-panel seams

Shin-length format extends coverage below the workbench edge

Adjustable neck loop accommodates different operator heights

Long waist ties secure the apron without exposed metal hardware

Smooth pocket-free surface simplifies controlled handling

고객 제품 관심사

An apron provides partial rather than full-body coverage. Material selection, gown overlap and disposal or laundering procedures must therefore match the actual task and the base garment worn underneath.

A short apron may leave the lower torso or upper legs exposed.Select shin-length coverage and suitable width for the operator and work posture.

Fixed neck dimensions can place the bib too high or low.Use an adjustable neck loop and long rear waist ties for controlled positioning.

Pockets and bulky fasteners can trap residues and particles.Specify a smooth pocket-free front with minimal seam count and no exposed hardware.

The apron material may not match the intended splash or ESD requirement.Choose the exact nonwoven, film-coated or conductive polyester construction based on task data.

일반적인 응용 프로그램

Used for controlled dispensing, clean packing, laboratory preparation, equipment wipe-down, visitor protection and other front-facing tasks where local gowning rules permit partial over-garment coverage.

기술 매개변수

These configurable dimensions describe a cleanroom apron, not a full protective garment. Final material and coverage must be selected after reviewing the base gowning system and process exposure.

핵심 재료	Flash-spun polyethylene, low-lint film or continuous-filament polyester
패널 두께	0.14–0.35 mm
유효 폭	650–900 mm
최대 길이	1250 mm
강철 면면 두께	0 mm, 강철 면재 사용 없음
코어 밀도	45–125 kg/m³ apparent material bulk density
열전도도 (Thermal Conductivity)	0.035–0.060 W/(m·K), material dependent
표면 마무리	Smooth low-lint white or light-blue surface without pockets
접합 유형	One-piece front panel with sewn or bonded neck and waist ties
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

White disposable nonwoven or reusable polyesterSleeveless bib or long-sleeve apronAdjustable neck loop or snap-adjusted neck strapRear ties or low-profile buckle systemConductive-grid polyester optionIndividual or bulk clean packaging

Planning a Cleanroom Apron specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.