Cleanroom apron shin-length three-quarter front product view

クリーンルーム衣料品、 PPE 、消耗品

クリーンルームエプロン

A lightweight low-lint cleanroom apron providing targeted front-torso and leg coverage with adjustable ties.

Shin-length low-lint front coverage
Adjustable neck and waist ties
Disposable or reusable material options

商品紹介

The Cleanroom Apron is a simple over-garment for tasks that need additional front-surface coverage without a full garment change. Its one-piece bib, smooth front panel, adjustable neck loop and long waist ties minimize hardware and allow quick donning. White flash-spun polyethylene, film-coated material or reusable polyester can be selected to suit handling and processing needs.

主要な特徴

One-piece bib and skirt reduce front-panel seams

Shin-length format extends coverage below the workbench edge

Adjustable neck loop accommodates different operator heights

Long waist ties secure the apron without exposed metal hardware

Smooth pocket-free surface simplifies controlled handling

お客様の製品に関する懸念事項

An apron provides partial rather than full-body coverage. Material selection, gown overlap and disposal or laundering procedures must therefore match the actual task and the base garment worn underneath.

A short apron may leave the lower torso or upper legs exposed.Select shin-length coverage and suitable width for the operator and work posture.

Fixed neck dimensions can place the bib too high or low.Use an adjustable neck loop and long rear waist ties for controlled positioning.

Pockets and bulky fasteners can trap residues and particles.Specify a smooth pocket-free front with minimal seam count and no exposed hardware.

The apron material may not match the intended splash or ESD requirement.Choose the exact nonwoven, film-coated or conductive polyester construction based on task data.

典型的な用途

Used for controlled dispensing, clean packing, laboratory preparation, equipment wipe-down, visitor protection and other front-facing tasks where local gowning rules permit partial over-garment coverage.

技術的なパラメータ

These configurable dimensions describe a cleanroom apron, not a full protective garment. Final material and coverage must be selected after reviewing the base gowning system and process exposure.

コア材料	Flash-spun polyethylene, low-lint film or continuous-filament polyester
パネルの厚さ	0.14–0.35 mm
有効幅	650–900 mm
最大長さ	1250 mm
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	45–125 kg/m³ apparent material bulk density
熱伝導率	0.035–0.060 W/(m·K), material dependent
表面仕上げ	Smooth low-lint white or light-blue surface without pockets
ジョイントタイプ	One-piece front panel with sewn or bonded neck and waist ties
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

White disposable nonwoven or reusable polyesterSleeveless bib or long-sleeve apronAdjustable neck loop or snap-adjusted neck strapRear ties or low-profile buckle systemConductive-grid polyester optionIndividual or bulk clean packaging

Planning a Cleanroom Apron specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する