İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Giysileri, PPE ve Tüketim Malzemeleri
Temiz Oda Apron
A lightweight low-lint cleanroom apron providing targeted front-torso and leg coverage with adjustable ties.
- Shin-length low-lint front coverage
- Adjustable neck and waist ties
- Disposable or reusable material options
Ürün tanıtımı
The Cleanroom Apron is a simple over-garment for tasks that need additional front-surface coverage without a full garment change. Its one-piece bib, smooth front panel, adjustable neck loop and long waist ties minimize hardware and allow quick donning. White flash-spun polyethylene, film-coated material or reusable polyester can be selected to suit handling and processing needs.
Ana Özellikler
Shin-length format extends coverage below the workbench edge
Adjustable neck loop accommodates different operator heights
Long waist ties secure the apron without exposed metal hardware
Smooth pocket-free surface simplifies controlled handling
Müşteri Ürün Sorunları
An apron provides partial rather than full-body coverage. Material selection, gown overlap and disposal or laundering procedures must therefore match the actual task and the base garment worn underneath.
A short apron may leave the lower torso or upper legs exposed.Select shin-length coverage and suitable width for the operator and work posture.
Fixed neck dimensions can place the bib too high or low.Use an adjustable neck loop and long rear waist ties for controlled positioning.
Pockets and bulky fasteners can trap residues and particles.Specify a smooth pocket-free front with minimal seam count and no exposed hardware.
The apron material may not match the intended splash or ESD requirement.Choose the exact nonwoven, film-coated or conductive polyester construction based on task data.
Tipik uygulamalar
Used for controlled dispensing, clean packing, laboratory preparation, equipment wipe-down, visitor protection and other front-facing tasks where local gowning rules permit partial over-garment coverage.
Teknik parametreler
These configurable dimensions describe a cleanroom apron, not a full protective garment. Final material and coverage must be selected after reviewing the base gowning system and process exposure.
| Temel malzemeler | Flash-spun polyethylene, low-lint film or continuous-filament polyester |
|---|---|
| Panel kalınlığı | 0.14–0.35 mm |
| Effective Width (Etkili Genişlik) | 650–900 mm |
| Maksimum uzunluk | 1250 mm |
| Çelik yüz yüze kalınlığı | 0 mm; Çelik yüzü kullanılmaz |
| Core Density (Çekirdek Yoğunluğu) | 45–125 kg/m³ apparent material bulk density |
| Termal İletkenlik | 0.035–0.060 W/(m·K), material dependent |
| Yüzey bitirme | Smooth low-lint white or light-blue surface without pockets |
| Ortak tip | One-piece front panel with sewn or bonded neck and waist ties |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
White disposable nonwoven or reusable polyesterSleeveless bib or long-sleeve apronAdjustable neck loop or snap-adjusted neck strapRear ties or low-profile buckle systemConductive-grid polyester optionIndividual or bulk clean packaging
Planning a Cleanroom Apron specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
