Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom Apron
A lightweight low-lint cleanroom apron providing targeted front-torso and leg coverage with adjustable ties.
- Shin-length low-lint front coverage
- Adjustable neck and waist ties
- Disposable or reusable material options
Introduction de produit
The Cleanroom Apron is a simple over-garment for tasks that need additional front-surface coverage without a full garment change. Its one-piece bib, smooth front panel, adjustable neck loop and long waist ties minimize hardware and allow quick donning. White flash-spun polyethylene, film-coated material or reusable polyester can be selected to suit handling and processing needs.
Key Features
Shin-length format extends coverage below the workbench edge
Adjustable neck loop accommodates different operator heights
Long waist ties secure the apron without exposed metal hardware
Smooth pocket-free surface simplifies controlled handling
Préoccupations du client produit
An apron provides partial rather than full-body coverage. Material selection, gown overlap and disposal or laundering procedures must therefore match the actual task and the base garment worn underneath.
A short apron may leave the lower torso or upper legs exposed.Select shin-length coverage and suitable width for the operator and work posture.
Fixed neck dimensions can place the bib too high or low.Use an adjustable neck loop and long rear waist ties for controlled positioning.
Pockets and bulky fasteners can trap residues and particles.Specify a smooth pocket-free front with minimal seam count and no exposed hardware.
The apron material may not match the intended splash or ESD requirement.Choose the exact nonwoven, film-coated or conductive polyester construction based on task data.
Les applications typiques
Used for controlled dispensing, clean packing, laboratory preparation, equipment wipe-down, visitor protection and other front-facing tasks where local gowning rules permit partial over-garment coverage.
Paramètres techniques
These configurable dimensions describe a cleanroom apron, not a full protective garment. Final material and coverage must be selected after reviewing the base gowning system and process exposure.
| Matériaux de base | Flash-spun polyethylene, low-lint film or continuous-filament polyester |
|---|---|
| Panneau épaisseur | 0.14–0.35 mm |
| Largeur effective | 650–900 mm |
| Longueur maximale | 1250 mm |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 45–125 kg/m³ apparent material bulk density |
| Conductivité thermique | 0.035–0.060 W/(m·K), material dependent |
| surface finie | Smooth low-lint white or light-blue surface without pockets |
| Type joint | One-piece front panel with sewn or bonded neck and waist ties |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
White disposable nonwoven or reusable polyesterSleeveless bib or long-sleeve apronAdjustable neck loop or snap-adjusted neck strapRear ties or low-profile buckle systemConductive-grid polyester optionIndividual or bulk clean packaging
Planning a Cleanroom Apron specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
