Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Distribuição de Ar para Sala Limpa
Isolamento de bolhas apertadas
A heavy rectangular isolation damper whose solid butterfly blade compresses a mechanically retained perimeter seal under high closing torque.
- Solid Butterfly Isolation Blade
- Mechanically Retained Perimeter Seal
- Double-Gland Axle Packing
- Heavy Flanged Channel Frame
Introdução do produto
The bubble-tight isolation damper uses one rigid rectangular butterfly blade inside a heavy flanged channel frame. When the actuator rotates the blade to closed, a continuous silicone seal is compressed against the seat around the complete perimeter. The drive axle passes through a double-gland stuffing box, and outboard bearings keep the blade aligned without placing the bearing races in the air path. Stainless-steel construction and compatible coatings allow the assembly to serve isolation, wash-down and decontamination boundaries.
Características-chave
The perimeter seal is mechanically fastened to the blade so it can be inspected and replaced without welding.
Double-gland axle packing restricts leakage around the rotating shaft where it exits the pressure boundary.
External relubricable bearings carry radial load while remaining accessible outside contaminated airflow.
Preocupações do produto do cliente
Bubble-tight service demands uniform perimeter compression, controlled shaft leakage and a frame stiff enough to remain square under differential pressure.
A multiblade damper leaves several blade-to-blade leakage paths at a critical boundary.One solid butterfly blade closes against a continuous seat with no intermediate blade joints.
The axle penetration leaks even though the blade perimeter is fully seated.A double-gland stuffing box seals around the rotating shaft outside the primary blade seal.
High differential pressure deflects a light frame and unloads part of the gasket.Heavy channel construction and a reinforced backing plate maintain seat geometry under closing load.
A damaged perimeter seal requires replacement of the complete blade assembly.Mechanical seal retainers allow the gasket to be removed and renewed as a service component.
Aplicações típicas
Biocontainment duct isolationPharmaceutical decontamination zonesHigh-integrity laboratory exhaustFilter housing isolation boundariesContaminated process-air shutdown
Parâmetros técnicos
Representative construction data for a heavy-duty rectangular bubble-tight isolation damper are shown below.
| Material principal | Solid 304 or 316 stainless-steel butterfly blade with continuous silicone perimeter seal |
|---|---|
| Painel de espessura | 2.7 mm solid rectangular blade plate |
| Largura efetiva | 254–1130 mm nominal clear opening width |
| Comprimento máximo | Up to 1321 mm nominal frame height |
| Aço enfrentando espessura | 2.7 mm stainless or coated-steel flanged channel frame |
| Densidade Core | Approximately 8000 kg/m³ for austenitic stainless-steel blade construction |
| Condutividade térmica | Approximately 14–16 W/(m·K) for 304 or 316 stainless steel |
| Superfície acabado | Mill-finish stainless steel or industrial epoxy coating with silicone blade seal |
| Tipo conjunto | Flanged channel frame with solid butterfly blade, bolted seal retainer and double-gland axle stuffing box |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
304 or 316 stainless-steel constructionElectric or pneumatic high-torque actuatorOpen-close position switchesIndustrial epoxy or polyester coating
Planning a Bubble-Tight Isolation Damper specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
