İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Bubble-Tight İzolasyon Damperı
A heavy rectangular isolation damper whose solid butterfly blade compresses a mechanically retained perimeter seal under high closing torque.
- Solid Butterfly Isolation Blade
- Mechanically Retained Perimeter Seal
- Double-Gland Axle Packing
- Heavy Flanged Channel Frame
Ürün tanıtımı
The bubble-tight isolation damper uses one rigid rectangular butterfly blade inside a heavy flanged channel frame. When the actuator rotates the blade to closed, a continuous silicone seal is compressed against the seat around the complete perimeter. The drive axle passes through a double-gland stuffing box, and outboard bearings keep the blade aligned without placing the bearing races in the air path. Stainless-steel construction and compatible coatings allow the assembly to serve isolation, wash-down and decontamination boundaries.
Ana Özellikler
The perimeter seal is mechanically fastened to the blade so it can be inspected and replaced without welding.
Double-gland axle packing restricts leakage around the rotating shaft where it exits the pressure boundary.
External relubricable bearings carry radial load while remaining accessible outside contaminated airflow.
Müşteri Ürün Sorunları
Bubble-tight service demands uniform perimeter compression, controlled shaft leakage and a frame stiff enough to remain square under differential pressure.
A multiblade damper leaves several blade-to-blade leakage paths at a critical boundary.One solid butterfly blade closes against a continuous seat with no intermediate blade joints.
The axle penetration leaks even though the blade perimeter is fully seated.A double-gland stuffing box seals around the rotating shaft outside the primary blade seal.
High differential pressure deflects a light frame and unloads part of the gasket.Heavy channel construction and a reinforced backing plate maintain seat geometry under closing load.
A damaged perimeter seal requires replacement of the complete blade assembly.Mechanical seal retainers allow the gasket to be removed and renewed as a service component.
Tipik uygulamalar
Biocontainment duct isolationPharmaceutical decontamination zonesHigh-integrity laboratory exhaustFilter housing isolation boundariesContaminated process-air shutdown
Teknik parametreler
Representative construction data for a heavy-duty rectangular bubble-tight isolation damper are shown below.
| Temel malzemeler | Solid 304 or 316 stainless-steel butterfly blade with continuous silicone perimeter seal |
|---|---|
| Panel kalınlığı | 2.7 mm solid rectangular blade plate |
| Effective Width (Etkili Genişlik) | 254–1130 mm nominal clear opening width |
| Maksimum uzunluk | Up to 1321 mm nominal frame height |
| Çelik yüz yüze kalınlığı | 2.7 mm stainless or coated-steel flanged channel frame |
| Core Density (Çekirdek Yoğunluğu) | Approximately 8000 kg/m³ for austenitic stainless-steel blade construction |
| Termal İletkenlik | Approximately 14–16 W/(m·K) for 304 or 316 stainless steel |
| Yüzey bitirme | Mill-finish stainless steel or industrial epoxy coating with silicone blade seal |
| Ortak tip | Flanged channel frame with solid butterfly blade, bolted seal retainer and double-gland axle stuffing box |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
304 or 316 stainless-steel constructionElectric or pneumatic high-torque actuatorOpen-close position switchesIndustrial epoxy or polyester coating
Planning a Bubble-Tight Isolation Damper specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
