Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de distribución de aire para salas limpias
Amortiguador de aislamiento Bubble-Tight por
A heavy rectangular isolation damper whose solid butterfly blade compresses a mechanically retained perimeter seal under high closing torque.
- Solid Butterfly Isolation Blade
- Mechanically Retained Perimeter Seal
- Double-Gland Axle Packing
- Heavy Flanged Channel Frame
Introducción del producto
The bubble-tight isolation damper uses one rigid rectangular butterfly blade inside a heavy flanged channel frame. When the actuator rotates the blade to closed, a continuous silicone seal is compressed against the seat around the complete perimeter. The drive axle passes through a double-gland stuffing box, and outboard bearings keep the blade aligned without placing the bearing races in the air path. Stainless-steel construction and compatible coatings allow the assembly to serve isolation, wash-down and decontamination boundaries.
Características clave
The perimeter seal is mechanically fastened to the blade so it can be inspected and replaced without welding.
Double-gland axle packing restricts leakage around the rotating shaft where it exits the pressure boundary.
External relubricable bearings carry radial load while remaining accessible outside contaminated airflow.
Preocupaciones del producto del cliente
Bubble-tight service demands uniform perimeter compression, controlled shaft leakage and a frame stiff enough to remain square under differential pressure.
A multiblade damper leaves several blade-to-blade leakage paths at a critical boundary.One solid butterfly blade closes against a continuous seat with no intermediate blade joints.
The axle penetration leaks even though the blade perimeter is fully seated.A double-gland stuffing box seals around the rotating shaft outside the primary blade seal.
High differential pressure deflects a light frame and unloads part of the gasket.Heavy channel construction and a reinforced backing plate maintain seat geometry under closing load.
A damaged perimeter seal requires replacement of the complete blade assembly.Mechanical seal retainers allow the gasket to be removed and renewed as a service component.
Aplicaciones típicas
Biocontainment duct isolationPharmaceutical decontamination zonesHigh-integrity laboratory exhaustFilter housing isolation boundariesContaminated process-air shutdown
Parámetros técnicos
Representative construction data for a heavy-duty rectangular bubble-tight isolation damper are shown below.
| Materiales Core | Solid 304 or 316 stainless-steel butterfly blade with continuous silicone perimeter seal |
|---|---|
| Panel de espesor | 2.7 mm solid rectangular blade plate |
| Ancho efectivo | 254–1130 mm nominal clear opening width |
| Longitud máxima | Up to 1321 mm nominal frame height |
| Acero frente a espesor | 2.7 mm stainless or coated-steel flanged channel frame |
| Densidad Core | Approximately 8000 kg/m³ for austenitic stainless-steel blade construction |
| Conductividad térmica | Approximately 14–16 W/(m·K) for 304 or 316 stainless steel |
| Superficie acabada | Mill-finish stainless steel or industrial epoxy coating with silicone blade seal |
| Tipo conjunto | Flanged channel frame with solid butterfly blade, bolted seal retainer and double-gland axle stuffing box |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316 stainless-steel constructionElectric or pneumatic high-torque actuatorOpen-close position switchesIndustrial epoxy or polyester coating
Planning a Bubble-Tight Isolation Damper specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
