Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Limpeza automática de filme adesivo
A low-profile entry cleaner that advances continuous replaceable adhesive film to collect loose particles from footwear.
- Continuous replaceable adhesive film
- Automatic fresh-film advance
- Dry footwear collection
- Low-profile stainless housing
Introdução do produto
The Automatic Adhesive-Film Sole Cleaner presents a continuous adhesive film beneath the footwear contact area. After the configured number of steps or cleaning cycles, the drive advances the used section and brings a fresh adhesive surface into position. The film is supplied as a replaceable roll or cartridge inside a low stainless housing, providing a dry entry process without a wash basin.
Características-chave
Film advance can be set to occur after a selected step or cycle count.
The replaceable film roll is changed as a consumable service item.
A guarded low-profile platform keeps the film path below the walking surface.
Dry operation avoids water, detergent and drain connections at the entry point.
Preocupações do produto do cliente
Disposable sheet mats can become unevenly loaded, while a fixed contact surface may not provide a controlled fresh adhesive area for each cycle.
The most-used area of a conventional tack mat loads before the rest of the sheet.The drive advances the continuous film so a fresh adhesive section is presented.
Staff need to peel individual tacky sheets during busy entry periods.Film is supplied as a replaceable roll or cartridge rather than stacked sheets.
Wet footwear equipment is unsuitable near moisture-sensitive processes.The cleaner collects loose material through a dry adhesive-film contact surface.
Moving parts at floor level must remain protected from footwear.A guarded housing keeps the film drive and roll path below the tread surface.
Aplicações típicas
Electronics cleanroom changing roomsOptical assembly entrancesDry pharmaceutical support areasLaboratory gowning routesPrecision manufacturing access points
Parâmetros técnicos
Film width, roll capacity and advance logic are selected to suit the footwear traffic pattern and available entry space.
| Material principal | Continuous replaceable adhesive polymer film in a welded SUS304 dispenser housing |
|---|---|
| Painel de espessura | 1.5–2.0 mm stainless steel housing panels |
| Largura efetiva | 350–600 mm active adhesive-film width |
| Comprimento máximo | 600–1100 mm overall platform length |
| Aço enfrentando espessura | 1.5–2.0 mm SUS304 |
| Densidade Core | 900–950 kg/m³ for adhesive-film polymer backing |
| Condutividade térmica | 0.35–0.45 W/(m·K) for adhesive-film polymer backing |
| Superfície acabado | Brushed SUS304 housing with continuous replaceable adhesive film |
| Tipo conjunto | Welded low-profile housing with removable film-roll cassette |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Film roll widthSingle-shoe or two-foot platformStep or cycle-count advanceSide guard rails
Planning a Automatic Adhesive-Film Sole Cleaner specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
