Peralatan Dekontaminasi Personil dan Bahan

Automatic Adhesive-Film Sole Cleaner

A low-profile entry cleaner that advances continuous replaceable adhesive film to collect loose particles from footwear.

Continuous replaceable adhesive film
Automatic fresh-film advance
Dry footwear collection
Low-profile stainless housing

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Automatic Adhesive-Film Sole Cleaner presents a continuous adhesive film beneath the footwear contact area. After the configured number of steps or cleaning cycles, the drive advances the used section and brings a fresh adhesive surface into position. The film is supplied as a replaceable roll or cartridge inside a low stainless housing, providing a dry entry process without a wash basin.

Fitur utama:

Continuous adhesive film presents a new collection surface as the used section advances.

Film advance can be set to occur after a selected step or cycle count.

The replaceable film roll is changed as a consumable service item.

A guarded low-profile platform keeps the film path below the walking surface.

Dry operation avoids water, detergent and drain connections at the entry point.

Kekhawatiran produk pelanggan

Disposable sheet mats can become unevenly loaded, while a fixed contact surface may not provide a controlled fresh adhesive area for each cycle.

The most-used area of a conventional tack mat loads before the rest of the sheet.The drive advances the continuous film so a fresh adhesive section is presented.

Staff need to peel individual tacky sheets during busy entry periods.Film is supplied as a replaceable roll or cartridge rather than stacked sheets.

Wet footwear equipment is unsuitable near moisture-sensitive processes.The cleaner collects loose material through a dry adhesive-film contact surface.

Moving parts at floor level must remain protected from footwear.A guarded housing keeps the film drive and roll path below the tread surface.

Aplikasi yang Tipis

Electronics cleanroom changing roomsOptical assembly entrancesDry pharmaceutical support areasLaboratory gowning routesPrecision manufacturing access points

Parameter teknis

Film width, roll capacity and advance logic are selected to suit the footwear traffic pattern and available entry space.

Bahan inti	Continuous replaceable adhesive polymer film in a welded SUS304 dispenser housing
Ketebalan Panel (Panel Thickness)	1.5–2.0 mm stainless steel housing panels
Efektif lebar	350–600 mm active adhesive-film width
Panjang maksimum	600–1100 mm overall platform length
Baja menghadap ketebalan	1.5–2.0 mm SUS304
Kepadatan inti (core density)	900–950 kg/m³ for adhesive-film polymer backing
Konduktivitas Termal (Thermal Conductivity)	0.35–0.45 W/(m·K) for adhesive-film polymer backing
Permukaan selesai	Brushed SUS304 housing with continuous replaceable adhesive film
Jenis Bersama	Welded low-profile housing with removable film-roll cassette
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Film roll widthSingle-shoe or two-foot platformStep or cycle-count advanceSide guard rails

Planning a Automatic Adhesive-Film Sole Cleaner specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami