인력 및 재료 오염 제거 장비

자동 접착제 필름 솔 클리너

A low-profile entry cleaner that advances continuous replaceable adhesive film to collect loose particles from footwear.

Continuous replaceable adhesive film
Automatic fresh-film advance
Dry footwear collection
Low-profile stainless housing

견적 요청 제품 찾아보기

상품 소개

The Automatic Adhesive-Film Sole Cleaner presents a continuous adhesive film beneath the footwear contact area. After the configured number of steps or cleaning cycles, the drive advances the used section and brings a fresh adhesive surface into position. The film is supplied as a replaceable roll or cartridge inside a low stainless housing, providing a dry entry process without a wash basin.

주요 기능

Continuous adhesive film presents a new collection surface as the used section advances.

Film advance can be set to occur after a selected step or cycle count.

The replaceable film roll is changed as a consumable service item.

A guarded low-profile platform keeps the film path below the walking surface.

Dry operation avoids water, detergent and drain connections at the entry point.

고객 제품 관심사

Disposable sheet mats can become unevenly loaded, while a fixed contact surface may not provide a controlled fresh adhesive area for each cycle.

The most-used area of a conventional tack mat loads before the rest of the sheet.The drive advances the continuous film so a fresh adhesive section is presented.

Staff need to peel individual tacky sheets during busy entry periods.Film is supplied as a replaceable roll or cartridge rather than stacked sheets.

Wet footwear equipment is unsuitable near moisture-sensitive processes.The cleaner collects loose material through a dry adhesive-film contact surface.

Moving parts at floor level must remain protected from footwear.A guarded housing keeps the film drive and roll path below the tread surface.

일반적인 응용 프로그램

Electronics cleanroom changing roomsOptical assembly entrancesDry pharmaceutical support areasLaboratory gowning routesPrecision manufacturing access points

기술 매개변수

Film width, roll capacity and advance logic are selected to suit the footwear traffic pattern and available entry space.

핵심 재료	Continuous replaceable adhesive polymer film in a welded SUS304 dispenser housing
패널 두께	1.5–2.0 mm stainless steel housing panels
유효 폭	350–600 mm active adhesive-film width
최대 길이	600–1100 mm overall platform length
강철 면면 두께	1.5–2.0 mm SUS304
코어 밀도	900–950 kg/m³ for adhesive-film polymer backing
열전도도 (Thermal Conductivity)	0.35–0.45 W/(m·K) for adhesive-film polymer backing
표면 마무리	Brushed SUS304 housing with continuous replaceable adhesive film
접합 유형	Welded low-profile housing with removable film-roll cassette
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Film roll widthSingle-shoe or two-foot platformStep or cycle-count advanceSide guard rails

Planning a Automatic Adhesive-Film Sole Cleaner specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.