Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Limpiador automático de película adhesiva sola por
A low-profile entry cleaner that advances continuous replaceable adhesive film to collect loose particles from footwear.
- Continuous replaceable adhesive film
- Automatic fresh-film advance
- Dry footwear collection
- Low-profile stainless housing
Introducción del producto
The Automatic Adhesive-Film Sole Cleaner presents a continuous adhesive film beneath the footwear contact area. After the configured number of steps or cleaning cycles, the drive advances the used section and brings a fresh adhesive surface into position. The film is supplied as a replaceable roll or cartridge inside a low stainless housing, providing a dry entry process without a wash basin.
Características clave
Film advance can be set to occur after a selected step or cycle count.
The replaceable film roll is changed as a consumable service item.
A guarded low-profile platform keeps the film path below the walking surface.
Dry operation avoids water, detergent and drain connections at the entry point.
Preocupaciones del producto del cliente
Disposable sheet mats can become unevenly loaded, while a fixed contact surface may not provide a controlled fresh adhesive area for each cycle.
The most-used area of a conventional tack mat loads before the rest of the sheet.The drive advances the continuous film so a fresh adhesive section is presented.
Staff need to peel individual tacky sheets during busy entry periods.Film is supplied as a replaceable roll or cartridge rather than stacked sheets.
Wet footwear equipment is unsuitable near moisture-sensitive processes.The cleaner collects loose material through a dry adhesive-film contact surface.
Moving parts at floor level must remain protected from footwear.A guarded housing keeps the film drive and roll path below the tread surface.
Aplicaciones típicas
Electronics cleanroom changing roomsOptical assembly entrancesDry pharmaceutical support areasLaboratory gowning routesPrecision manufacturing access points
Parámetros técnicos
Film width, roll capacity and advance logic are selected to suit the footwear traffic pattern and available entry space.
| Materiales Core | Continuous replaceable adhesive polymer film in a welded SUS304 dispenser housing |
|---|---|
| Panel de espesor | 1.5–2.0 mm stainless steel housing panels |
| Ancho efectivo | 350–600 mm active adhesive-film width |
| Longitud máxima | 600–1100 mm overall platform length |
| Acero frente a espesor | 1.5–2.0 mm SUS304 |
| Densidad Core | 900–950 kg/m³ for adhesive-film polymer backing |
| Conductividad térmica | 0.35–0.45 W/(m·K) for adhesive-film polymer backing |
| Superficie acabada | Brushed SUS304 housing with continuous replaceable adhesive film |
| Tipo conjunto | Welded low-profile housing with removable film-roll cassette |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Film roll widthSingle-shoe or two-foot platformStep or cycle-count advanceSide guard rails
Planning a Automatic Adhesive-Film Sole Cleaner specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
