Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Nettoyant automatique adhésif-film Sole
A low-profile entry cleaner that advances continuous replaceable adhesive film to collect loose particles from footwear.
- Continuous replaceable adhesive film
- Automatic fresh-film advance
- Dry footwear collection
- Low-profile stainless housing
Introduction de produit
The Automatic Adhesive-Film Sole Cleaner presents a continuous adhesive film beneath the footwear contact area. After the configured number of steps or cleaning cycles, the drive advances the used section and brings a fresh adhesive surface into position. The film is supplied as a replaceable roll or cartridge inside a low stainless housing, providing a dry entry process without a wash basin.
Key Features
Film advance can be set to occur after a selected step or cycle count.
The replaceable film roll is changed as a consumable service item.
A guarded low-profile platform keeps the film path below the walking surface.
Dry operation avoids water, detergent and drain connections at the entry point.
Préoccupations du client produit
Disposable sheet mats can become unevenly loaded, while a fixed contact surface may not provide a controlled fresh adhesive area for each cycle.
The most-used area of a conventional tack mat loads before the rest of the sheet.The drive advances the continuous film so a fresh adhesive section is presented.
Staff need to peel individual tacky sheets during busy entry periods.Film is supplied as a replaceable roll or cartridge rather than stacked sheets.
Wet footwear equipment is unsuitable near moisture-sensitive processes.The cleaner collects loose material through a dry adhesive-film contact surface.
Moving parts at floor level must remain protected from footwear.A guarded housing keeps the film drive and roll path below the tread surface.
Les applications typiques
Electronics cleanroom changing roomsOptical assembly entrancesDry pharmaceutical support areasLaboratory gowning routesPrecision manufacturing access points
Paramètres techniques
Film width, roll capacity and advance logic are selected to suit the footwear traffic pattern and available entry space.
| Matériaux de base | Continuous replaceable adhesive polymer film in a welded SUS304 dispenser housing |
|---|---|
| Panneau épaisseur | 1.5–2.0 mm stainless steel housing panels |
| Largeur effective | 350–600 mm active adhesive-film width |
| Longueur maximale | 600–1100 mm overall platform length |
| Acier face épaisseur | 1.5–2.0 mm SUS304 |
| Densité Core | 900–950 kg/m³ for adhesive-film polymer backing |
| Conductivité thermique | 0.35–0.45 W/(m·K) for adhesive-film polymer backing |
| surface finie | Brushed SUS304 housing with continuous replaceable adhesive film |
| Type joint | Welded low-profile housing with removable film-roll cassette |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Film roll widthSingle-shoe or two-foot platformStep or cycle-count advanceSide guard rails
Planning a Automatic Adhesive-Film Sole Cleaner specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
