English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
Aالتلقائي لاصق الفيلم المنظف الوحيد
A low-profile entry cleaner that advances continuous replaceable adhesive film to collect loose particles from footwear.
- Continuous replaceable adhesive film
- Automatic fresh-film advance
- Dry footwear collection
- Low-profile stainless housing
مقدمة المنتج
The Automatic Adhesive-Film Sole Cleaner presents a continuous adhesive film beneath the footwear contact area. After the configured number of steps or cleaning cycles, the drive advances the used section and brings a fresh adhesive surface into position. The film is supplied as a replaceable roll or cartridge inside a low stainless housing, providing a dry entry process without a wash basin.
الخصائص الرئيسية
Film advance can be set to occur after a selected step or cycle count.
The replaceable film roll is changed as a consumable service item.
A guarded low-profile platform keeps the film path below the walking surface.
Dry operation avoids water, detergent and drain connections at the entry point.
مخاوف المنتج للعملاء
Disposable sheet mats can become unevenly loaded, while a fixed contact surface may not provide a controlled fresh adhesive area for each cycle.
The most-used area of a conventional tack mat loads before the rest of the sheet.The drive advances the continuous film so a fresh adhesive section is presented.
Staff need to peel individual tacky sheets during busy entry periods.Film is supplied as a replaceable roll or cartridge rather than stacked sheets.
Wet footwear equipment is unsuitable near moisture-sensitive processes.The cleaner collects loose material through a dry adhesive-film contact surface.
Moving parts at floor level must remain protected from footwear.A guarded housing keeps the film drive and roll path below the tread surface.
تطبيقات نموذجية
Electronics cleanroom changing roomsOptical assembly entrancesDry pharmaceutical support areasLaboratory gowning routesPrecision manufacturing access points
المعلمات الفنية
Film width, roll capacity and advance logic are selected to suit the footwear traffic pattern and available entry space.
| المواد الأساسية | Continuous replaceable adhesive polymer film in a welded SUS304 dispenser housing |
|---|---|
| سمك اللوحة | 1.5–2.0 mm stainless steel housing panels |
| العرض الفعال | 350–600 mm active adhesive-film width |
| الحد الأقصى الطول | 600–1100 mm overall platform length |
| الصلب يواجه سمك | 1.5–2.0 mm SUS304 |
| الكثافة الأساسية | 900–950 kg/m³ for adhesive-film polymer backing |
| الموصلية الحرارية | 0.35–0.45 W/(m·K) for adhesive-film polymer backing |
| إنهاء السطح | Brushed SUS304 housing with continuous replaceable adhesive film |
| نوع المشترك | Welded low-profile housing with removable film-roll cassette |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Film roll widthSingle-shoe or two-foot platformStep or cycle-count advanceSide guard rails
Planning a Automatic Adhesive-Film Sole Cleaner specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
