Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistema de piso para sala limpa
Z Piso epoxi antiestático
A seamless epoxy system with conductive components and earth connections that limits static build-up across controlled production floors.
- Static Build-Up Control
- Grounded Conductive Primer
- Seamless Hygienic Surface
- Custom Electrical Range
Introdução do produto
Antistatic epoxy flooring adds electrically conductive pigments or fibers to a smooth epoxy wearing layer installed over a conductive primer and planned earth connections. Instead of allowing charge to accumulate on an insulating resin surface, the complete build-up provides a controlled path toward ground. The system retains the cleanability and chemical resistance expected from seamless epoxy while supporting areas where powder transfer, packaging equipment or personnel movement can generate nuisance static. Electrical performance is verified on the installed floor, not inferred from resin alone.
Características-chave
Copper grounding points connect the conductive primer to the building earthing network.
The smooth, impermeable epoxy surface avoids the open seams associated with antistatic tiles.
System resistance can be selected for the process risk and checked after cure with the specified test method.
Preocupações do produto do cliente
Static control depends on a complete path from the wearing surface to earth; a conductive resin without coordinated grounding cannot provide consistent performance.
Personnel and carts build charge on a conventional insulating epoxy floor.Conductive filler within the wearing layer transfers charge to the grounded primer below.
Antistatic tile joints collect residue and can separate under wheeled traffic.The poured epoxy field is seamless and bonded continuously to the prepared substrate.
Resistance varies because grounding strips are sparse or disconnected.A planned copper earth network and conductive primer create multiple verified routes to ground.
An aggressive cleaning method changes surface resistance over time.The maintenance plan uses compatible cleaners and periodic electrical measurements to track the installed surface.
Aplicações típicas
Pharmaceutical powder handling roomsCleanroom packaging linesCosmetic production areasControlled dispensing roomsStatic-sensitive laboratories
Parâmetros técnicos
Typical data for a self-smoothing antistatic epoxy floor with conductive primer and earth connections are shown below.
| Material principal | Solvent-free epoxy resin with conductive carbon additives and fine quartz filler |
|---|---|
| Painel de espessura | 1.5–2.5 mm nominal antistatic system thickness |
| Largura efetiva | Typically 2000–4000 mm controlled placement bay width |
| Comprimento máximo | Typically up to 15000 mm continuous field between active slab joints |
| Aço enfrentando espessura | 0 mm; electrical control is provided by resin additives, not steel facing |
| Densidade Core | Approximately 1450–1650 kg/m³ for the mixed conductive epoxy |
| Condutividade térmica | Typically 0.30–0.45 W/(m·K) for the cured conductive epoxy layer |
| Superfície acabado | Smooth gloss or light-textured pigmented finish with visible conductive fibers possible |
| Tipo conjunto | Earth strip and conductive-primer network beneath a seamless epoxy wearing layer; target resistance to ground below 1 × 10⁹ Ω |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Smooth self-leveling or lightly textured finishAlternative resistance ranges for process needsIntegral coves and grounded wall returnsStandard static-control color selection
Planning a Antistatic Epoxy Flooring specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
