Antistatic epoxy flooring slab in three-quarter view with an exposed black conductive layer and copper grounding plate

Sistem Lantai Bilik Bersih

Lantai epoksi antistatik

A seamless epoxy system with conductive components and earth connections that limits static build-up across controlled production floors.

Static Build-Up Control
Grounded Conductive Primer
Seamless Hygienic Surface
Custom Electrical Range

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Antistatic epoxy flooring adds electrically conductive pigments or fibers to a smooth epoxy wearing layer installed over a conductive primer and planned earth connections. Instead of allowing charge to accumulate on an insulating resin surface, the complete build-up provides a controlled path toward ground. The system retains the cleanability and chemical resistance expected from seamless epoxy while supporting areas where powder transfer, packaging equipment or personnel movement can generate nuisance static. Electrical performance is verified on the installed floor, not inferred from resin alone.

Ciri-ciri Utama

Conductive additives distribute charge through the wearing layer instead of leaving isolated surface hot spots.

Copper grounding points connect the conductive primer to the building earthing network.

The smooth, impermeable epoxy surface avoids the open seams associated with antistatic tiles.

System resistance can be selected for the process risk and checked after cure with the specified test method.

Kebimbangan Produk Pelanggan

Static control depends on a complete path from the wearing surface to earth; a conductive resin without coordinated grounding cannot provide consistent performance.

Personnel and carts build charge on a conventional insulating epoxy floor.Conductive filler within the wearing layer transfers charge to the grounded primer below.

Antistatic tile joints collect residue and can separate under wheeled traffic.The poured epoxy field is seamless and bonded continuously to the prepared substrate.

Resistance varies because grounding strips are sparse or disconnected.A planned copper earth network and conductive primer create multiple verified routes to ground.

An aggressive cleaning method changes surface resistance over time.The maintenance plan uses compatible cleaners and periodic electrical measurements to track the installed surface.

Permohonan yang biasa

Pharmaceutical powder handling roomsCleanroom packaging linesCosmetic production areasControlled dispensing roomsStatic-sensitive laboratories

Parameter teknikal

Typical data for a self-smoothing antistatic epoxy floor with conductive primer and earth connections are shown below.

Bahan Teras	Solvent-free epoxy resin with conductive carbon additives and fine quartz filler
Ketebalan Panel	1.5–2.5 mm nominal antistatic system thickness
Lebar berkesan	Typically 2000–4000 mm controlled placement bay width
Panjang maksimum	Typically up to 15000 mm continuous field between active slab joints
Keluli Menghadapi Ketebalan	0 mm; electrical control is provided by resin additives, not steel facing
Ketumpatan teras	Approximately 1450–1650 kg/m³ for the mixed conductive epoxy
Kekonduksian Terma	Typically 0.30–0.45 W/(m·K) for the cured conductive epoxy layer
Kemasan permukaan	Smooth gloss or light-textured pigmented finish with visible conductive fibers possible
Jenis Bersatu	Earth strip and conductive-primer network beneath a seamless epoxy wearing layer; target resistance to ground below 1 × 10⁹ Ω
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Smooth self-leveling or lightly textured finishAlternative resistance ranges for process needsIntegral coves and grounded wall returnsStandard static-control color selection

Planning a Antistatic Epoxy Flooring specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami