Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom Flooring Systems
A plancher époxy antistatique
A seamless epoxy system with conductive components and earth connections that limits static build-up across controlled production floors.
- Static Build-Up Control
- Grounded Conductive Primer
- Seamless Hygienic Surface
- Custom Electrical Range
Introduction de produit
Antistatic epoxy flooring adds electrically conductive pigments or fibers to a smooth epoxy wearing layer installed over a conductive primer and planned earth connections. Instead of allowing charge to accumulate on an insulating resin surface, the complete build-up provides a controlled path toward ground. The system retains the cleanability and chemical resistance expected from seamless epoxy while supporting areas where powder transfer, packaging equipment or personnel movement can generate nuisance static. Electrical performance is verified on the installed floor, not inferred from resin alone.
Key Features
Copper grounding points connect the conductive primer to the building earthing network.
The smooth, impermeable epoxy surface avoids the open seams associated with antistatic tiles.
System resistance can be selected for the process risk and checked after cure with the specified test method.
Préoccupations du client produit
Static control depends on a complete path from the wearing surface to earth; a conductive resin without coordinated grounding cannot provide consistent performance.
Personnel and carts build charge on a conventional insulating epoxy floor.Conductive filler within the wearing layer transfers charge to the grounded primer below.
Antistatic tile joints collect residue and can separate under wheeled traffic.The poured epoxy field is seamless and bonded continuously to the prepared substrate.
Resistance varies because grounding strips are sparse or disconnected.A planned copper earth network and conductive primer create multiple verified routes to ground.
An aggressive cleaning method changes surface resistance over time.The maintenance plan uses compatible cleaners and periodic electrical measurements to track the installed surface.
Les applications typiques
Pharmaceutical powder handling roomsCleanroom packaging linesCosmetic production areasControlled dispensing roomsStatic-sensitive laboratories
Paramètres techniques
Typical data for a self-smoothing antistatic epoxy floor with conductive primer and earth connections are shown below.
| Matériaux de base | Solvent-free epoxy resin with conductive carbon additives and fine quartz filler |
|---|---|
| Panneau épaisseur | 1.5–2.5 mm nominal antistatic system thickness |
| Largeur effective | Typically 2000–4000 mm controlled placement bay width |
| Longueur maximale | Typically up to 15000 mm continuous field between active slab joints |
| Acier face épaisseur | 0 mm; electrical control is provided by resin additives, not steel facing |
| Densité Core | Approximately 1450–1650 kg/m³ for the mixed conductive epoxy |
| Conductivité thermique | Typically 0.30–0.45 W/(m·K) for the cured conductive epoxy layer |
| surface finie | Smooth gloss or light-textured pigmented finish with visible conductive fibers possible |
| Type joint | Earth strip and conductive-primer network beneath a seamless epoxy wearing layer; target resistance to ground below 1 × 10⁹ Ω |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Smooth self-leveling or lightly textured finishAlternative resistance ranges for process needsIntegral coves and grounded wall returnsStandard static-control color selection
Planning a Antistatic Epoxy Flooring specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
