Antistatic epoxy flooring slab in three-quarter view with an exposed black conductive layer and copper grounding plate

클린룸 바닥 시스템

Anti Static Epoxy 바닥

A seamless epoxy system with conductive components and earth connections that limits static build-up across controlled production floors.

Static Build-Up Control
Grounded Conductive Primer
Seamless Hygienic Surface
Custom Electrical Range

견적 요청 제품 찾아보기

상품 소개

Antistatic epoxy flooring adds electrically conductive pigments or fibers to a smooth epoxy wearing layer installed over a conductive primer and planned earth connections. Instead of allowing charge to accumulate on an insulating resin surface, the complete build-up provides a controlled path toward ground. The system retains the cleanability and chemical resistance expected from seamless epoxy while supporting areas where powder transfer, packaging equipment or personnel movement can generate nuisance static. Electrical performance is verified on the installed floor, not inferred from resin alone.

주요 기능

Conductive additives distribute charge through the wearing layer instead of leaving isolated surface hot spots.

Copper grounding points connect the conductive primer to the building earthing network.

The smooth, impermeable epoxy surface avoids the open seams associated with antistatic tiles.

System resistance can be selected for the process risk and checked after cure with the specified test method.

고객 제품 관심사

Static control depends on a complete path from the wearing surface to earth; a conductive resin without coordinated grounding cannot provide consistent performance.

Personnel and carts build charge on a conventional insulating epoxy floor.Conductive filler within the wearing layer transfers charge to the grounded primer below.

Antistatic tile joints collect residue and can separate under wheeled traffic.The poured epoxy field is seamless and bonded continuously to the prepared substrate.

Resistance varies because grounding strips are sparse or disconnected.A planned copper earth network and conductive primer create multiple verified routes to ground.

An aggressive cleaning method changes surface resistance over time.The maintenance plan uses compatible cleaners and periodic electrical measurements to track the installed surface.

일반적인 응용 프로그램

Pharmaceutical powder handling roomsCleanroom packaging linesCosmetic production areasControlled dispensing roomsStatic-sensitive laboratories

기술 매개변수

Typical data for a self-smoothing antistatic epoxy floor with conductive primer and earth connections are shown below.

핵심 재료	Solvent-free epoxy resin with conductive carbon additives and fine quartz filler
패널 두께	1.5–2.5 mm nominal antistatic system thickness
유효 폭	Typically 2000–4000 mm controlled placement bay width
최대 길이	Typically up to 15000 mm continuous field between active slab joints
강철 면면 두께	0 mm; electrical control is provided by resin additives, not steel facing
코어 밀도	Approximately 1450–1650 kg/m³ for the mixed conductive epoxy
열전도도 (Thermal Conductivity)	Typically 0.30–0.45 W/(m·K) for the cured conductive epoxy layer
표면 마무리	Smooth gloss or light-textured pigmented finish with visible conductive fibers possible
접합 유형	Earth strip and conductive-primer network beneath a seamless epoxy wearing layer; target resistance to ground below 1 × 10⁹ Ω
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Smooth self-leveling or lightly textured finishAlternative resistance ranges for process needsIntegral coves and grounded wall returnsStandard static-control color selection

Planning a Antistatic Epoxy Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.