Antistatic epoxy flooring slab in three-quarter view with an exposed black conductive layer and copper grounding plate

Temiz Oda zemin sistemleri

Antistatik Epoxy zemin

A seamless epoxy system with conductive components and earth connections that limits static build-up across controlled production floors.

Static Build-Up Control
Grounded Conductive Primer
Seamless Hygienic Surface
Custom Electrical Range

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Antistatic epoxy flooring adds electrically conductive pigments or fibers to a smooth epoxy wearing layer installed over a conductive primer and planned earth connections. Instead of allowing charge to accumulate on an insulating resin surface, the complete build-up provides a controlled path toward ground. The system retains the cleanability and chemical resistance expected from seamless epoxy while supporting areas where powder transfer, packaging equipment or personnel movement can generate nuisance static. Electrical performance is verified on the installed floor, not inferred from resin alone.

Ana Özellikler

Conductive additives distribute charge through the wearing layer instead of leaving isolated surface hot spots.

Copper grounding points connect the conductive primer to the building earthing network.

The smooth, impermeable epoxy surface avoids the open seams associated with antistatic tiles.

System resistance can be selected for the process risk and checked after cure with the specified test method.

Müşteri Ürün Sorunları

Static control depends on a complete path from the wearing surface to earth; a conductive resin without coordinated grounding cannot provide consistent performance.

Personnel and carts build charge on a conventional insulating epoxy floor.Conductive filler within the wearing layer transfers charge to the grounded primer below.

Antistatic tile joints collect residue and can separate under wheeled traffic.The poured epoxy field is seamless and bonded continuously to the prepared substrate.

Resistance varies because grounding strips are sparse or disconnected.A planned copper earth network and conductive primer create multiple verified routes to ground.

An aggressive cleaning method changes surface resistance over time.The maintenance plan uses compatible cleaners and periodic electrical measurements to track the installed surface.

Tipik uygulamalar

Pharmaceutical powder handling roomsCleanroom packaging linesCosmetic production areasControlled dispensing roomsStatic-sensitive laboratories

Teknik parametreler

Typical data for a self-smoothing antistatic epoxy floor with conductive primer and earth connections are shown below.

Temel malzemeler	Solvent-free epoxy resin with conductive carbon additives and fine quartz filler
Panel kalınlığı	1.5–2.5 mm nominal antistatic system thickness
Effective Width (Etkili Genişlik)	Typically 2000–4000 mm controlled placement bay width
Maksimum uzunluk	Typically up to 15000 mm continuous field between active slab joints
Çelik yüz yüze kalınlığı	0 mm; electrical control is provided by resin additives, not steel facing
Core Density (Çekirdek Yoğunluğu)	Approximately 1450–1650 kg/m³ for the mixed conductive epoxy
Termal İletkenlik	Typically 0.30–0.45 W/(m·K) for the cured conductive epoxy layer
Yüzey bitirme	Smooth gloss or light-textured pigmented finish with visible conductive fibers possible
Ortak tip	Earth strip and conductive-primer network beneath a seamless epoxy wearing layer; target resistance to ground below 1 × 10⁹ Ω
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Smooth self-leveling or lightly textured finishAlternative resistance ranges for process needsIntegral coves and grounded wall returnsStandard static-control color selection

Planning a Antistatic Epoxy Flooring specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun