Antistatic epoxy flooring slab in three-quarter view with an exposed black conductive layer and copper grounding plate

クリーンルームフロアシステム

Ant 静電エポキシ床

A seamless epoxy system with conductive components and earth connections that limits static build-up across controlled production floors.

Static Build-Up Control
Grounded Conductive Primer
Seamless Hygienic Surface
Custom Electrical Range

見積もりリクエスト製品案内

商品紹介

Antistatic epoxy flooring adds electrically conductive pigments or fibers to a smooth epoxy wearing layer installed over a conductive primer and planned earth connections. Instead of allowing charge to accumulate on an insulating resin surface, the complete build-up provides a controlled path toward ground. The system retains the cleanability and chemical resistance expected from seamless epoxy while supporting areas where powder transfer, packaging equipment or personnel movement can generate nuisance static. Electrical performance is verified on the installed floor, not inferred from resin alone.

主要な特徴

Conductive additives distribute charge through the wearing layer instead of leaving isolated surface hot spots.

Copper grounding points connect the conductive primer to the building earthing network.

The smooth, impermeable epoxy surface avoids the open seams associated with antistatic tiles.

System resistance can be selected for the process risk and checked after cure with the specified test method.

お客様の製品に関する懸念事項

Static control depends on a complete path from the wearing surface to earth; a conductive resin without coordinated grounding cannot provide consistent performance.

Personnel and carts build charge on a conventional insulating epoxy floor.Conductive filler within the wearing layer transfers charge to the grounded primer below.

Antistatic tile joints collect residue and can separate under wheeled traffic.The poured epoxy field is seamless and bonded continuously to the prepared substrate.

Resistance varies because grounding strips are sparse or disconnected.A planned copper earth network and conductive primer create multiple verified routes to ground.

An aggressive cleaning method changes surface resistance over time.The maintenance plan uses compatible cleaners and periodic electrical measurements to track the installed surface.

典型的な用途

Pharmaceutical powder handling roomsCleanroom packaging linesCosmetic production areasControlled dispensing roomsStatic-sensitive laboratories

技術的なパラメータ

Typical data for a self-smoothing antistatic epoxy floor with conductive primer and earth connections are shown below.

コア材料	Solvent-free epoxy resin with conductive carbon additives and fine quartz filler
パネルの厚さ	1.5–2.5 mm nominal antistatic system thickness
有効幅	Typically 2000–4000 mm controlled placement bay width
最大長さ	Typically up to 15000 mm continuous field between active slab joints
鋼鉄の厚さを直面する	0 mm; electrical control is provided by resin additives, not steel facing
コア密度	Approximately 1450–1650 kg/m³ for the mixed conductive epoxy
熱伝導率	Typically 0.30–0.45 W/(m·K) for the cured conductive epoxy layer
表面仕上げ	Smooth gloss or light-textured pigmented finish with visible conductive fibers possible
ジョイントタイプ	Earth strip and conductive-primer network beneath a seamless epoxy wearing layer; target resistance to ground below 1 × 10⁹ Ω
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Smooth self-leveling or lightly textured finishAlternative resistance ranges for process needsIntegral coves and grounded wall returnsStandard static-control color selection

Planning a Antistatic Epoxy Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する