Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Acessórios de instalação de sala limpa
Sealante Antibacteriano
A hygienic elastic sealant formulated for cleanroom joints that need a smooth, moisture-resistant surface under repeated cleaning and disinfection.
- Hygienic Joint Surface
- Mold-Growth Resistance
- Washdown-Compatible Seal
- Flexible Gap Closure
Introdução do produto
Antibacterial sealant is a one-component, moisture-curing compound intended for sanitary perimeter and connection joints in controlled interiors. The cured bead forms an elastic, non-porous transition that tolerates routine cleaning moisture and limits surface conditions that support mold or bacterial growth. Its non-sag consistency permits neat application around coated panels, frames, benches and service interfaces, while compatible primers can be selected for demanding or dissimilar substrates.
Características-chave
Fungus- and mold-resistant formulations support hygienic joints in repeatedly damp service areas.
Elastic movement capability helps the bead remain continuous as panels, frames and fixtures expand differently.
Non-sag application allows controlled tooling on vertical perimeters and overhead junctions.
Preocupações do produto do cliente
Frequently cleaned cleanroom joints need to remain smooth and sealed even when exposed to moisture, disinfectants and small substrate movements.
Persistent moisture at rough joints creates sheltered areas for mold and residue accumulation.A finely tooled, non-porous bead removes open crevices and presents an accessible cleaning surface.
Repeated washdown causes unsuitable fillers to soften, discolor or detach.A moisture-resistant hygienic formulation is matched to the cleaning regime and allowed to cure fully before service.
Movement between fixtures and wall panels opens cracks at rigid sanitary junctions.The elastomeric seal follows normal differential movement without relying on a brittle cementitious bridge.
Incompatible cleaners can gradually damage an otherwise sound joint.Chemical compatibility is checked against the intended disinfectant concentration, contact time and cleaning temperature.
Aplicações típicas
Hygienic wall and ceiling junctionsCleanroom washdown-area perimetersSanitary bench and sink interfacesDoor and observation-window framesControlled-area service penetrations
Parâmetros técnicos
Typical construction and application ranges for a cartridge-applied hygienic antibacterial joint sealant are shown below.
| Material principal | One-component hygienic silicone or silane-modified polymer elastomer with fungistatic additive |
|---|---|
| Painel de espessura | 3-12 mm recommended cured seal depth |
| Largura efetiva | 5-25 mm practical sanitary joint width |
| Comprimento máximo | Up to 10000 mm continuous bead per prepared joint section |
| Aço enfrentando espessura | 0.40-1.20 mm compatible coated-steel panel or fixture facing |
| Densidade Core | Approximately 1200-1550 kg/m³ uncured compound density |
| Condutividade térmica | Approximately 0.20-0.35 W/(m·K) for cured elastomer |
| Superfície acabado | Smooth non-porous tooled finish in white or selected hygienic colors |
| Tipo conjunto | Elastic sanitary butt, perimeter or fixture joint over non-adhering backing material |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
White or translucent compoundSilicone or silane-modified polymer chemistryCompatible substrate primerCartridge or foil-pack supply
Planning a Antibacterial Sealant specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
