Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Installation Zubehör
Antibakterielles Sealant
A hygienic elastic sealant formulated for cleanroom joints that need a smooth, moisture-resistant surface under repeated cleaning and disinfection.
- Hygienic Joint Surface
- Mold-Growth Resistance
- Washdown-Compatible Seal
- Flexible Gap Closure
Produkteinführung
Antibacterial sealant is a one-component, moisture-curing compound intended for sanitary perimeter and connection joints in controlled interiors. The cured bead forms an elastic, non-porous transition that tolerates routine cleaning moisture and limits surface conditions that support mold or bacterial growth. Its non-sag consistency permits neat application around coated panels, frames, benches and service interfaces, while compatible primers can be selected for demanding or dissimilar substrates.
Key Features
Fungus- and mold-resistant formulations support hygienic joints in repeatedly damp service areas.
Elastic movement capability helps the bead remain continuous as panels, frames and fixtures expand differently.
Non-sag application allows controlled tooling on vertical perimeters and overhead junctions.
Kunden Produktbedenken
Frequently cleaned cleanroom joints need to remain smooth and sealed even when exposed to moisture, disinfectants and small substrate movements.
Persistent moisture at rough joints creates sheltered areas for mold and residue accumulation.A finely tooled, non-porous bead removes open crevices and presents an accessible cleaning surface.
Repeated washdown causes unsuitable fillers to soften, discolor or detach.A moisture-resistant hygienic formulation is matched to the cleaning regime and allowed to cure fully before service.
Movement between fixtures and wall panels opens cracks at rigid sanitary junctions.The elastomeric seal follows normal differential movement without relying on a brittle cementitious bridge.
Incompatible cleaners can gradually damage an otherwise sound joint.Chemical compatibility is checked against the intended disinfectant concentration, contact time and cleaning temperature.
Typische Anwendungen
Hygienic wall and ceiling junctionsCleanroom washdown-area perimetersSanitary bench and sink interfacesDoor and observation-window framesControlled-area service penetrations
Technische Parameter
Typical construction and application ranges for a cartridge-applied hygienic antibacterial joint sealant are shown below.
| Core Material | One-component hygienic silicone or silane-modified polymer elastomer with fungistatic additive |
|---|---|
| Panel Dicke | 3-12 mm recommended cured seal depth |
| Effektive Breite | 5-25 mm practical sanitary joint width |
| Maximale Länge | Up to 10000 mm continuous bead per prepared joint section |
| Stahl facing Dicke | 0.40-1.20 mm compatible coated-steel panel or fixture facing |
| Kerndichte | Approximately 1200-1550 kg/m³ uncured compound density |
| Thermische Leitfähigkeit | Approximately 0.20-0.35 W/(m·K) for cured elastomer |
| Oberfläche Finish | Smooth non-porous tooled finish in white or selected hygienic colors |
| Gemeinsamer Typ | Elastic sanitary butt, perimeter or fixture joint over non-adhering backing material |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
White or translucent compoundSilicone or silane-modified polymer chemistryCompatible substrate primerCartridge or foil-pack supply
Planning a Antibacterial Sealant specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
