Three-quarter view of an antibacterial sealant cartridge with hygienic application nozzle

クリーンルームの設置付属品

抗菌シーラント

A hygienic elastic sealant formulated for cleanroom joints that need a smooth, moisture-resistant surface under repeated cleaning and disinfection.

Hygienic Joint Surface
Mold-Growth Resistance
Washdown-Compatible Seal
Flexible Gap Closure

見積もりリクエスト製品案内

商品紹介

Antibacterial sealant is a one-component, moisture-curing compound intended for sanitary perimeter and connection joints in controlled interiors. The cured bead forms an elastic, non-porous transition that tolerates routine cleaning moisture and limits surface conditions that support mold or bacterial growth. Its non-sag consistency permits neat application around coated panels, frames, benches and service interfaces, while compatible primers can be selected for demanding or dissimilar substrates.

主要な特徴

A smooth, closed cured surface reduces crevices where moisture and cleaning residue can remain.

Fungus- and mold-resistant formulations support hygienic joints in repeatedly damp service areas.

Elastic movement capability helps the bead remain continuous as panels, frames and fixtures expand differently.

Non-sag application allows controlled tooling on vertical perimeters and overhead junctions.

お客様の製品に関する懸念事項

Frequently cleaned cleanroom joints need to remain smooth and sealed even when exposed to moisture, disinfectants and small substrate movements.

Persistent moisture at rough joints creates sheltered areas for mold and residue accumulation.A finely tooled, non-porous bead removes open crevices and presents an accessible cleaning surface.

Repeated washdown causes unsuitable fillers to soften, discolor or detach.A moisture-resistant hygienic formulation is matched to the cleaning regime and allowed to cure fully before service.

Movement between fixtures and wall panels opens cracks at rigid sanitary junctions.The elastomeric seal follows normal differential movement without relying on a brittle cementitious bridge.

Incompatible cleaners can gradually damage an otherwise sound joint.Chemical compatibility is checked against the intended disinfectant concentration, contact time and cleaning temperature.

典型的な用途

Hygienic wall and ceiling junctionsCleanroom washdown-area perimetersSanitary bench and sink interfacesDoor and observation-window framesControlled-area service penetrations

技術的なパラメータ

Typical construction and application ranges for a cartridge-applied hygienic antibacterial joint sealant are shown below.

コア材料	One-component hygienic silicone or silane-modified polymer elastomer with fungistatic additive
パネルの厚さ	3-12 mm recommended cured seal depth
有効幅	5-25 mm practical sanitary joint width
最大長さ	Up to 10000 mm continuous bead per prepared joint section
鋼鉄の厚さを直面する	0.40-1.20 mm compatible coated-steel panel or fixture facing
コア密度	Approximately 1200-1550 kg/m³ uncured compound density
熱伝導率	Approximately 0.20-0.35 W/(m·K) for cured elastomer
表面仕上げ	Smooth non-porous tooled finish in white or selected hygienic colors
ジョイントタイプ	Elastic sanitary butt, perimeter or fixture joint over non-adhering backing material
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

White or translucent compoundSilicone or silane-modified polymer chemistryCompatible substrate primerCartridge or foil-pack supply

Planning a Antibacterial Sealant specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する