Three-quarter view of an antibacterial sealant cartridge with hygienic application nozzle

Аксессуары для установки в чистых помещениях

Антибактериальный уплотнитель

A hygienic elastic sealant formulated for cleanroom joints that need a smooth, moisture-resistant surface under repeated cleaning and disinfection.

Hygienic Joint Surface
Mold-Growth Resistance
Washdown-Compatible Seal
Flexible Gap Closure

Запрос котировки Просмотреть продукты

Введение продукции

Antibacterial sealant is a one-component, moisture-curing compound intended for sanitary perimeter and connection joints in controlled interiors. The cured bead forms an elastic, non-porous transition that tolerates routine cleaning moisture and limits surface conditions that support mold or bacterial growth. Its non-sag consistency permits neat application around coated panels, frames, benches and service interfaces, while compatible primers can be selected for demanding or dissimilar substrates.

Основные характеристики

A smooth, closed cured surface reduces crevices where moisture and cleaning residue can remain.

Fungus- and mold-resistant formulations support hygienic joints in repeatedly damp service areas.

Elastic movement capability helps the bead remain continuous as panels, frames and fixtures expand differently.

Non-sag application allows controlled tooling on vertical perimeters and overhead junctions.

Обеспокоенность клиентов продуктами

Frequently cleaned cleanroom joints need to remain smooth and sealed even when exposed to moisture, disinfectants and small substrate movements.

Persistent moisture at rough joints creates sheltered areas for mold and residue accumulation.A finely tooled, non-porous bead removes open crevices and presents an accessible cleaning surface.

Repeated washdown causes unsuitable fillers to soften, discolor or detach.A moisture-resistant hygienic formulation is matched to the cleaning regime and allowed to cure fully before service.

Movement between fixtures and wall panels opens cracks at rigid sanitary junctions.The elastomeric seal follows normal differential movement without relying on a brittle cementitious bridge.

Incompatible cleaners can gradually damage an otherwise sound joint.Chemical compatibility is checked against the intended disinfectant concentration, contact time and cleaning temperature.

Типичные приложения

Hygienic wall and ceiling junctionsCleanroom washdown-area perimetersSanitary bench and sink interfacesDoor and observation-window framesControlled-area service penetrations

Технические параметры

Typical construction and application ranges for a cartridge-applied hygienic antibacterial joint sealant are shown below.

Основной материал	One-component hygienic silicone or silane-modified polymer elastomer with fungistatic additive
Толщина панели	3-12 mm recommended cured seal depth
эффективная ширина	5-25 mm practical sanitary joint width
Максимальная длина	Up to 10000 mm continuous bead per prepared joint section
Толщина линий стали	0.40-1.20 mm compatible coated-steel panel or fixture facing
Плотность ядра	Approximately 1200-1550 kg/m³ uncured compound density
Теплопроводимость	Approximately 0.20-0.35 W/(m·K) for cured elastomer
Поверхностная отделка	Smooth non-porous tooled finish in white or selected hygienic colors
Объединенный тип	Elastic sanitary butt, perimeter or fixture joint over non-adhering backing material
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

White or translucent compoundSilicone or silane-modified polymer chemistryCompatible substrate primerКартридж или упаковка из фольги

Planning a Antibacterial Sealant specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой