Three-quarter view of an antibacterial sealant cartridge with hygienic application nozzle

Aksesori Pemasangan Bilik Bersih

Sealant Antibakteria

A hygienic elastic sealant formulated for cleanroom joints that need a smooth, moisture-resistant surface under repeated cleaning and disinfection.

Hygienic Joint Surface
Mold-Growth Resistance
Washdown-Compatible Seal
Flexible Gap Closure

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Antibacterial sealant is a one-component, moisture-curing compound intended for sanitary perimeter and connection joints in controlled interiors. The cured bead forms an elastic, non-porous transition that tolerates routine cleaning moisture and limits surface conditions that support mold or bacterial growth. Its non-sag consistency permits neat application around coated panels, frames, benches and service interfaces, while compatible primers can be selected for demanding or dissimilar substrates.

Ciri-ciri Utama

A smooth, closed cured surface reduces crevices where moisture and cleaning residue can remain.

Fungus- and mold-resistant formulations support hygienic joints in repeatedly damp service areas.

Elastic movement capability helps the bead remain continuous as panels, frames and fixtures expand differently.

Non-sag application allows controlled tooling on vertical perimeters and overhead junctions.

Kebimbangan Produk Pelanggan

Frequently cleaned cleanroom joints need to remain smooth and sealed even when exposed to moisture, disinfectants and small substrate movements.

Persistent moisture at rough joints creates sheltered areas for mold and residue accumulation.A finely tooled, non-porous bead removes open crevices and presents an accessible cleaning surface.

Repeated washdown causes unsuitable fillers to soften, discolor or detach.A moisture-resistant hygienic formulation is matched to the cleaning regime and allowed to cure fully before service.

Movement between fixtures and wall panels opens cracks at rigid sanitary junctions.The elastomeric seal follows normal differential movement without relying on a brittle cementitious bridge.

Incompatible cleaners can gradually damage an otherwise sound joint.Chemical compatibility is checked against the intended disinfectant concentration, contact time and cleaning temperature.

Permohonan yang biasa

Hygienic wall and ceiling junctionsCleanroom washdown-area perimetersSanitary bench and sink interfacesDoor and observation-window framesControlled-area service penetrations

Parameter teknikal

Typical construction and application ranges for a cartridge-applied hygienic antibacterial joint sealant are shown below.

Bahan Teras	One-component hygienic silicone or silane-modified polymer elastomer with fungistatic additive
Ketebalan Panel	3-12 mm recommended cured seal depth
Lebar berkesan	5-25 mm practical sanitary joint width
Panjang maksimum	Up to 10000 mm continuous bead per prepared joint section
Keluli Menghadapi Ketebalan	0.40-1.20 mm compatible coated-steel panel or fixture facing
Ketumpatan teras	Approximately 1200-1550 kg/m³ uncured compound density
Kekonduksian Terma	Approximately 0.20-0.35 W/(m·K) for cured elastomer
Kemasan permukaan	Smooth non-porous tooled finish in white or selected hygienic colors
Jenis Bersatu	Elastic sanitary butt, perimeter or fixture joint over non-adhering backing material
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

White or translucent compoundSilicone or silane-modified polymer chemistryCompatible substrate primerCartridge or foil-pack supply

Planning a Antibacterial Sealant specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami