İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Antibakteriyel Sealant
A hygienic elastic sealant formulated for cleanroom joints that need a smooth, moisture-resistant surface under repeated cleaning and disinfection.
- Hygienic Joint Surface
- Mold-Growth Resistance
- Washdown-Compatible Seal
- Flexible Gap Closure
Ürün tanıtımı
Antibacterial sealant is a one-component, moisture-curing compound intended for sanitary perimeter and connection joints in controlled interiors. The cured bead forms an elastic, non-porous transition that tolerates routine cleaning moisture and limits surface conditions that support mold or bacterial growth. Its non-sag consistency permits neat application around coated panels, frames, benches and service interfaces, while compatible primers can be selected for demanding or dissimilar substrates.
Ana Özellikler
Fungus- and mold-resistant formulations support hygienic joints in repeatedly damp service areas.
Elastic movement capability helps the bead remain continuous as panels, frames and fixtures expand differently.
Non-sag application allows controlled tooling on vertical perimeters and overhead junctions.
Müşteri Ürün Sorunları
Frequently cleaned cleanroom joints need to remain smooth and sealed even when exposed to moisture, disinfectants and small substrate movements.
Persistent moisture at rough joints creates sheltered areas for mold and residue accumulation.A finely tooled, non-porous bead removes open crevices and presents an accessible cleaning surface.
Repeated washdown causes unsuitable fillers to soften, discolor or detach.A moisture-resistant hygienic formulation is matched to the cleaning regime and allowed to cure fully before service.
Movement between fixtures and wall panels opens cracks at rigid sanitary junctions.The elastomeric seal follows normal differential movement without relying on a brittle cementitious bridge.
Incompatible cleaners can gradually damage an otherwise sound joint.Chemical compatibility is checked against the intended disinfectant concentration, contact time and cleaning temperature.
Tipik uygulamalar
Hygienic wall and ceiling junctionsCleanroom washdown-area perimetersSanitary bench and sink interfacesDoor and observation-window framesControlled-area service penetrations
Teknik parametreler
Typical construction and application ranges for a cartridge-applied hygienic antibacterial joint sealant are shown below.
| Temel malzemeler | One-component hygienic silicone or silane-modified polymer elastomer with fungistatic additive |
|---|---|
| Panel kalınlığı | 3-12 mm recommended cured seal depth |
| Effective Width (Etkili Genişlik) | 5-25 mm practical sanitary joint width |
| Maksimum uzunluk | Up to 10000 mm continuous bead per prepared joint section |
| Çelik yüz yüze kalınlığı | 0.40-1.20 mm compatible coated-steel panel or fixture facing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1200-1550 kg/m³ uncured compound density |
| Termal İletkenlik | Approximately 0.20-0.35 W/(m·K) for cured elastomer |
| Yüzey bitirme | Smooth non-porous tooled finish in white or selected hygienic colors |
| Ortak tip | Elastic sanitary butt, perimeter or fixture joint over non-adhering backing material |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
White or translucent compoundSilicone or silane-modified polymer chemistryCompatible substrate primerCartridge or foil-pack supply
Planning a Antibacterial Sealant specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
