Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Distribuição de Ar para Sala Limpa
Z Alumínio isolado jaqueta
A formed aluminum outer cladding that protects duct insulation from impact, weather and maintenance traffic while preserving a clean metallic finish.
- Durable Aluminum Protection
- Moisture-Barrier Backing
- Smooth or Embossed Finish
- Formed for Ducts and Fittings
Introdução do produto
Aluminum insulation jacketing forms the outer mechanical and weather protection over insulated ductwork. Flat sheet or coil is cut and formed around rectangular ducts, round ducts, elbows and equipment casings with overlapped seams oriented to shed water. A factory-applied polyethylene moisture barrier separates the metal jacket from wet insulation and reduces galvanic contact. Smooth, stucco-embossed or corrugated finishes are available, and banding or sealed sheet-metal fasteners secure the cladding without crushing the insulation beneath.
Características-chave
Polyfilm backing separates the jacket from retained moisture and dissimilar metal surfaces.
Stucco embossing disguises minor handling marks and increases sheet stiffness.
Purpose-formed closures maintain coverage around elbows, access doors and irregular fittings.
Preocupações do produto do cliente
Protective cladding must keep water out without puncturing the vapor barrier or compressing the insulation it is intended to protect.
Maintenance activity tears exposed foil-faced insulation.Rigid aluminum cladding provides a sacrificial impact-resistant outer surface.
Rain enters upward-facing laps on an outdoor duct.Shingle-oriented overlaps and sealed top seams direct water away from the insulation.
Condensate trapped against bare aluminum causes corrosion staining.A factory-applied polyfilm moisture barrier isolates the underside of the jacket.
Tight bands compress insulation and create thermal bridges.Correctly spaced banding secures the jacket while preserving the designed insulation thickness.
Aplicações típicas
Outdoor insulated air ductsMechanical-room ductworkCleanroom ceiling service zonesProcess exhaust insulation protectionInsulated plenums and fittings
Parâmetros técnicos
Typical material ranges for aluminum jacketing used over HVAC duct insulation are shown below.
| Material principal | 3003 or 3105 aluminum alloy sheet with optional polyfilm moisture barrier |
|---|---|
| Painel de espessura | 0.4–1.0 mm aluminum cladding |
| Largura efetiva | 1000–1200 mm coil or sheet width |
| Comprimento máximo | 3000 mm sheet length or continuous coil supply |
| Aço enfrentando espessura | 0.4–1.0 mm aluminum jacket in place of steel facing |
| Densidade Core | Approximately 2700 kg/m³ solid aluminum |
| Condutividade térmica | Approximately 160–200 W/(m·K) for aluminum jacketing alloy |
| Superfície acabado | Smooth, stucco-embossed or corrugated mill-finish aluminum |
| Tipo conjunto | Overlapped weather-shedding seam with bands, rivets or sealed sheet-metal screws |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Smooth or stucco-embossed finishPolyfilm moisture-barrier backingAluminum or stainless bandingPreformed elbow and access-door covers
Planning a Aluminum Insulation Jacketing specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
