English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة توزيع الهواء في الغرف النظيفة
الألومنيوم العزل سترة
A formed aluminum outer cladding that protects duct insulation from impact, weather and maintenance traffic while preserving a clean metallic finish.
- Durable Aluminum Protection
- Moisture-Barrier Backing
- Smooth or Embossed Finish
- Formed for Ducts and Fittings
مقدمة المنتج
Aluminum insulation jacketing forms the outer mechanical and weather protection over insulated ductwork. Flat sheet or coil is cut and formed around rectangular ducts, round ducts, elbows and equipment casings with overlapped seams oriented to shed water. A factory-applied polyethylene moisture barrier separates the metal jacket from wet insulation and reduces galvanic contact. Smooth, stucco-embossed or corrugated finishes are available, and banding or sealed sheet-metal fasteners secure the cladding without crushing the insulation beneath.
الخصائص الرئيسية
Polyfilm backing separates the jacket from retained moisture and dissimilar metal surfaces.
Stucco embossing disguises minor handling marks and increases sheet stiffness.
Purpose-formed closures maintain coverage around elbows, access doors and irregular fittings.
مخاوف المنتج للعملاء
Protective cladding must keep water out without puncturing the vapor barrier or compressing the insulation it is intended to protect.
Maintenance activity tears exposed foil-faced insulation.Rigid aluminum cladding provides a sacrificial impact-resistant outer surface.
Rain enters upward-facing laps on an outdoor duct.Shingle-oriented overlaps and sealed top seams direct water away from the insulation.
Condensate trapped against bare aluminum causes corrosion staining.A factory-applied polyfilm moisture barrier isolates the underside of the jacket.
Tight bands compress insulation and create thermal bridges.Correctly spaced banding secures the jacket while preserving the designed insulation thickness.
تطبيقات نموذجية
Outdoor insulated air ductsMechanical-room ductworkCleanroom ceiling service zonesProcess exhaust insulation protectionInsulated plenums and fittings
المعلمات الفنية
Typical material ranges for aluminum jacketing used over HVAC duct insulation are shown below.
| المواد الأساسية | 3003 or 3105 aluminum alloy sheet with optional polyfilm moisture barrier |
|---|---|
| سمك اللوحة | 0.4–1.0 mm aluminum cladding |
| العرض الفعال | 1000–1200 mm coil or sheet width |
| الحد الأقصى الطول | 3000 mm sheet length or continuous coil supply |
| الصلب يواجه سمك | 0.4–1.0 mm aluminum jacket in place of steel facing |
| الكثافة الأساسية | Approximately 2700 kg/m³ solid aluminum |
| الموصلية الحرارية | Approximately 160–200 W/(m·K) for aluminum jacketing alloy |
| إنهاء السطح | Smooth, stucco-embossed or corrugated mill-finish aluminum |
| نوع المشترك | Overlapped weather-shedding seam with bands, rivets or sealed sheet-metal screws |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Smooth or stucco-embossed finishPolyfilm moisture-barrier backingAluminum or stainless bandingPreformed elbow and access-door covers
Planning a Aluminum Insulation Jacketing specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
