Embossed aluminum insulation jacketing roll for HVAC duct protection

Temiz Oda Hava Dağıtım Sistemleri

Alüminyum yalıtım ceket

A formed aluminum outer cladding that protects duct insulation from impact, weather and maintenance traffic while preserving a clean metallic finish.

Durable Aluminum Protection
Moisture-Barrier Backing
Smooth or Embossed Finish
Formed for Ducts and Fittings

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Aluminum insulation jacketing forms the outer mechanical and weather protection over insulated ductwork. Flat sheet or coil is cut and formed around rectangular ducts, round ducts, elbows and equipment casings with overlapped seams oriented to shed water. A factory-applied polyethylene moisture barrier separates the metal jacket from wet insulation and reduces galvanic contact. Smooth, stucco-embossed or corrugated finishes are available, and banding or sealed sheet-metal fasteners secure the cladding without crushing the insulation beneath.

Ana Özellikler

Lightweight aluminum protects soft insulation against tears, impact and routine maintenance contact.

Polyfilm backing separates the jacket from retained moisture and dissimilar metal surfaces.

Stucco embossing disguises minor handling marks and increases sheet stiffness.

Purpose-formed closures maintain coverage around elbows, access doors and irregular fittings.

Müşteri Ürün Sorunları

Protective cladding must keep water out without puncturing the vapor barrier or compressing the insulation it is intended to protect.

Maintenance activity tears exposed foil-faced insulation.Rigid aluminum cladding provides a sacrificial impact-resistant outer surface.

Rain enters upward-facing laps on an outdoor duct.Shingle-oriented overlaps and sealed top seams direct water away from the insulation.

Condensate trapped against bare aluminum causes corrosion staining.A factory-applied polyfilm moisture barrier isolates the underside of the jacket.

Tight bands compress insulation and create thermal bridges.Correctly spaced banding secures the jacket while preserving the designed insulation thickness.

Tipik uygulamalar

Outdoor insulated air ductsMechanical-room ductworkCleanroom ceiling service zonesProcess exhaust insulation protectionInsulated plenums and fittings

Teknik parametreler

Typical material ranges for aluminum jacketing used over HVAC duct insulation are shown below.

Temel malzemeler	3003 or 3105 aluminum alloy sheet with optional polyfilm moisture barrier
Panel kalınlığı	0.4–1.0 mm aluminum cladding
Effective Width (Etkili Genişlik)	1000–1200 mm coil or sheet width
Maksimum uzunluk	3000 mm sheet length or continuous coil supply
Çelik yüz yüze kalınlığı	0.4–1.0 mm aluminum jacket in place of steel facing
Core Density (Çekirdek Yoğunluğu)	Approximately 2700 kg/m³ solid aluminum
Termal İletkenlik	Approximately 160–200 W/(m·K) for aluminum jacketing alloy
Yüzey bitirme	Smooth, stucco-embossed or corrugated mill-finish aluminum
Ortak tip	Overlapped weather-shedding seam with bands, rivets or sealed sheet-metal screws
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Smooth or stucco-embossed finishPolyfilm moisture-barrier backingAluminum or stainless bandingPreformed elbow and access-door covers

Planning a Aluminum Insulation Jacketing specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun