Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Luftverteilungssysteme
Aluminium Isolierung Jackett
A formed aluminum outer cladding that protects duct insulation from impact, weather and maintenance traffic while preserving a clean metallic finish.
- Durable Aluminum Protection
- Moisture-Barrier Backing
- Smooth or Embossed Finish
- Formed for Ducts and Fittings
Produkteinführung
Aluminum insulation jacketing forms the outer mechanical and weather protection over insulated ductwork. Flat sheet or coil is cut and formed around rectangular ducts, round ducts, elbows and equipment casings with overlapped seams oriented to shed water. A factory-applied polyethylene moisture barrier separates the metal jacket from wet insulation and reduces galvanic contact. Smooth, stucco-embossed or corrugated finishes are available, and banding or sealed sheet-metal fasteners secure the cladding without crushing the insulation beneath.
Key Features
Polyfilm backing separates the jacket from retained moisture and dissimilar metal surfaces.
Stucco embossing disguises minor handling marks and increases sheet stiffness.
Purpose-formed closures maintain coverage around elbows, access doors and irregular fittings.
Kunden Produktbedenken
Protective cladding must keep water out without puncturing the vapor barrier or compressing the insulation it is intended to protect.
Maintenance activity tears exposed foil-faced insulation.Rigid aluminum cladding provides a sacrificial impact-resistant outer surface.
Rain enters upward-facing laps on an outdoor duct.Shingle-oriented overlaps and sealed top seams direct water away from the insulation.
Condensate trapped against bare aluminum causes corrosion staining.A factory-applied polyfilm moisture barrier isolates the underside of the jacket.
Tight bands compress insulation and create thermal bridges.Correctly spaced banding secures the jacket while preserving the designed insulation thickness.
Typische Anwendungen
Outdoor insulated air ductsMechanical-room ductworkCleanroom ceiling service zonesProcess exhaust insulation protectionInsulated plenums and fittings
Technische Parameter
Typical material ranges for aluminum jacketing used over HVAC duct insulation are shown below.
| Core Material | 3003 or 3105 aluminum alloy sheet with optional polyfilm moisture barrier |
|---|---|
| Panel Dicke | 0.4–1.0 mm aluminum cladding |
| Effektive Breite | 1000–1200 mm coil or sheet width |
| Maximale Länge | 3000 mm sheet length or continuous coil supply |
| Stahl facing Dicke | 0.4–1.0 mm aluminum jacket in place of steel facing |
| Kerndichte | Approximately 2700 kg/m³ solid aluminum |
| Thermische Leitfähigkeit | Approximately 160–200 W/(m·K) for aluminum jacketing alloy |
| Oberfläche Finish | Smooth, stucco-embossed or corrugated mill-finish aluminum |
| Gemeinsamer Typ | Overlapped weather-shedding seam with bands, rivets or sealed sheet-metal screws |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Smooth or stucco-embossed finishPolyfilm moisture-barrier backingAluminum or stainless bandingPreformed elbow and access-door covers
Planning a Aluminum Insulation Jacketing specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
