EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Sterile Cleanroom Garment
A sterile-supply hooded cleanroom coverall with integrated footwear interfaces and packaging options for controlled aseptic gowning.
- Integrated hood and footwear for fewer gowning interfaces
- Covered zipper, thumb loops and controlled elastic openings
- Configurable sterile-supply packaging and aseptic folding
Product Introduction
The Sterile Cleanroom Garment is a single-piece hooded coverall intended for facilities that use documented sterile gowning procedures. A low-lint white nonwoven body, enclosed zipper, elasticated face and wrist openings, thumb loops and attached boot covers reduce the number of separate garment interfaces. Individually packed and aseptically folded options support defined gowning sequences.
Key Features
Covered front zipper supports a smooth contamination-control surface
Elastic face, wrist and ankle areas provide controlled fit
Thumb loops help maintain sleeve position while gloves are donned
Individually packed and aseptically folded supply options available
Customer Product Concerns
A sterile-supply garment must arrive in a configuration that supports the facility's aseptic donning sequence while limiting loose interfaces and unnecessary handling. Processing status, packaging layers and lot documentation must correspond to the actual supplied garment rather than a generic product description.
Multiple separate garments can complicate aseptic donning and create interface gaps.Use an integrated hooded coverall with attached footwear and compatible glove interfaces.
An exposed zipper or loose sleeve can contact critical surfaces during gowning.Specify a covered zipper, thumb loops and controlled elastic openings to stabilize garment position.
Packaging that does not match the gowning sequence can increase handling steps.Select individual, double-bagged or aseptically folded packaging based on the facility procedure.
Sterile status and processing traceability must correspond to the delivered lot.Supply the selected sterilization and lot documentation with the actual order rather than relying on generic claims.
Typical Applications
Used in aseptic pharmaceutical production, biotechnology, sterile medical-device operations, controlled laboratories and other processes that specify documented sterile cleanroom apparel.
Technical Parameters
These parameters describe an integrated hooded nonwoven coverall with footwear interfaces for documented sterile supply. Material, seam treatment, overall dimensions, folding method and packaging configuration are selected together for the intended aseptic workflow.
| Core Material | Low-lint flash-spun polyethylene or cleanroom-compatible laminate nonwoven |
|---|---|
| Panel Thickness | 0.16–0.35 mm |
| Effective Width | 520–780 mm per laid-flat garment section |
| Maximum Length | 2100 mm including integrated hood and footwear |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 55–105 kg/m³ apparent material bulk density |
| Thermal Conductivity | 0.035–0.055 W/(m·K), material dependent |
| Surface Finish | Smooth white low-lint surface with enclosed seam edges |
| Joint Type | Serged, bound or taped seams with covered front zipper and integrated hood/boots |
| Customization | Available based on the intended application and operating environment. |
Available Options
Attached hood with elastic or bound face openingAttached shoe covers or boot coversSerged, bound or taped seam constructionCovered thumb loopsIndividual or multi-layer packagingSterilization and processing configuration matched to order requirements
Planning a Sterile Cleanroom Garment specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
