English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Стерильная одежда для чистых помещений
A sterile-supply hooded cleanroom coverall with integrated footwear interfaces and packaging options for controlled aseptic gowning.
- Integrated hood and footwear for fewer gowning interfaces
- Covered zipper, thumb loops and controlled elastic openings
- Configurable sterile-supply packaging and aseptic folding
Введение продукции
The Sterile Cleanroom Garment is a single-piece hooded coverall intended for facilities that use documented sterile gowning procedures. A low-lint white nonwoven body, enclosed zipper, elasticated face and wrist openings, thumb loops and attached boot covers reduce the number of separate garment interfaces. Individually packed and aseptically folded options support defined gowning sequences.
Основные характеристики
Covered front zipper supports a smooth contamination-control surface
Elastic face, wrist and ankle areas provide controlled fit
Thumb loops help maintain sleeve position while gloves are donned
Individually packed and aseptically folded supply options available
Обеспокоенность клиентов продуктами
A sterile-supply garment must arrive in a configuration that supports the facility's aseptic donning sequence while limiting loose interfaces and unnecessary handling. Processing status, packaging layers and lot documentation must correspond to the actual supplied garment rather than a generic product description.
Multiple separate garments can complicate aseptic donning and create interface gaps.Use an integrated hooded coverall with attached footwear and compatible glove interfaces.
An exposed zipper or loose sleeve can contact critical surfaces during gowning.Specify a covered zipper, thumb loops and controlled elastic openings to stabilize garment position.
Packaging that does not match the gowning sequence can increase handling steps.Select individual, double-bagged or aseptically folded packaging based on the facility procedure.
Sterile status and processing traceability must correspond to the delivered lot.Supply the selected sterilization and lot documentation with the actual order rather than relying on generic claims.
Типичные приложения
Used in aseptic pharmaceutical production, biotechnology, sterile medical-device operations, controlled laboratories and other processes that specify documented sterile cleanroom apparel.
Технические параметры
These parameters describe an integrated hooded nonwoven coverall with footwear interfaces for documented sterile supply. Material, seam treatment, overall dimensions, folding method and packaging configuration are selected together for the intended aseptic workflow.
| Основной материал | Low-lint flash-spun polyethylene or cleanroom-compatible laminate nonwoven |
|---|---|
| Толщина панели | 0.16–0.35 mm |
| эффективная ширина | 520–780 mm per laid-flat garment section |
| Максимальная длина | 2100 mm including integrated hood and footwear |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 55–105 kg/m³ apparent material bulk density |
| Теплопроводимость | 0.035–0.055 W/(m·K), material dependent |
| Поверхностная отделка | Smooth white low-lint surface with enclosed seam edges |
| Объединенный тип | Serged, bound or taped seams with covered front zipper and integrated hood/boots |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Attached hood with elastic or bound face openingAttached shoe covers or boot coversSerged, bound or taped seam constructionCovered thumb loopsIndividual or multi-layer packagingSterilization and processing configuration matched to order requirements
Planning a Sterile Cleanroom Garment specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
