Sterile cleanroom garment hooded coverall three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Pakaian Bilik Bersih Steril

A sterile-supply hooded cleanroom coverall with integrated footwear interfaces and packaging options for controlled aseptic gowning.

Integrated hood and footwear for fewer gowning interfaces
Covered zipper, thumb loops and controlled elastic openings
Configurable sterile-supply packaging and aseptic folding

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Sterile Cleanroom Garment is a single-piece hooded coverall intended for facilities that use documented sterile gowning procedures. A low-lint white nonwoven body, enclosed zipper, elasticated face and wrist openings, thumb loops and attached boot covers reduce the number of separate garment interfaces. Individually packed and aseptically folded options support defined gowning sequences.

Ciri-ciri Utama

Integrated hood and footwear coverage reduce separate garment interfaces

Covered front zipper supports a smooth contamination-control surface

Elastic face, wrist and ankle areas provide controlled fit

Thumb loops help maintain sleeve position while gloves are donned

Individually packed and aseptically folded supply options available

Kebimbangan Produk Pelanggan

A sterile-supply garment must arrive in a configuration that supports the facility's aseptic donning sequence while limiting loose interfaces and unnecessary handling. Processing status, packaging layers and lot documentation must correspond to the actual supplied garment rather than a generic product description.

Multiple separate garments can complicate aseptic donning and create interface gaps.Use an integrated hooded coverall with attached footwear and compatible glove interfaces.

An exposed zipper or loose sleeve can contact critical surfaces during gowning.Specify a covered zipper, thumb loops and controlled elastic openings to stabilize garment position.

Packaging that does not match the gowning sequence can increase handling steps.Select individual, double-bagged or aseptically folded packaging based on the facility procedure.

Sterile status and processing traceability must correspond to the delivered lot.Supply the selected sterilization and lot documentation with the actual order rather than relying on generic claims.

Permohonan yang biasa

Used in aseptic pharmaceutical production, biotechnology, sterile medical-device operations, controlled laboratories and other processes that specify documented sterile cleanroom apparel.

Parameter teknikal

These parameters describe an integrated hooded nonwoven coverall with footwear interfaces for documented sterile supply. Material, seam treatment, overall dimensions, folding method and packaging configuration are selected together for the intended aseptic workflow.

Bahan Teras	Low-lint flash-spun polyethylene or cleanroom-compatible laminate nonwoven
Ketebalan Panel	0.16–0.35 mm
Lebar berkesan	520–780 mm per laid-flat garment section
Panjang maksimum	2100 mm including integrated hood and footwear
Keluli Menghadapi Ketebalan	0 mm; tiada keluli menghadap digunakan
Ketumpatan teras	55–105 kg/m³ apparent material bulk density
Kekonduksian Terma	0.035–0.055 W/(m·K), material dependent
Kemasan permukaan	Smooth white low-lint surface with enclosed seam edges
Jenis Bersatu	Serged, bound or taped seams with covered front zipper and integrated hood/boots
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Attached hood with elastic or bound face openingAttached shoe covers or boot coversSerged, bound or taped seam constructionCovered thumb loopsIndividual or multi-layer packagingSterilization and processing configuration matched to order requirements

Planning a Sterile Cleanroom Garment specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami