Sterile cleanroom garment hooded coverall three-quarter view

クリーンルーム衣料品、 PPE 、消耗品

滅菌クリーンルーム衣料品

A sterile-supply hooded cleanroom coverall with integrated footwear interfaces and packaging options for controlled aseptic gowning.

Integrated hood and footwear for fewer gowning interfaces
Covered zipper, thumb loops and controlled elastic openings
Configurable sterile-supply packaging and aseptic folding

見積もりリクエスト製品案内

商品紹介

The Sterile Cleanroom Garment is a single-piece hooded coverall intended for facilities that use documented sterile gowning procedures. A low-lint white nonwoven body, enclosed zipper, elasticated face and wrist openings, thumb loops and attached boot covers reduce the number of separate garment interfaces. Individually packed and aseptically folded options support defined gowning sequences.

主要な特徴

Integrated hood and footwear coverage reduce separate garment interfaces

Covered front zipper supports a smooth contamination-control surface

Elastic face, wrist and ankle areas provide controlled fit

Thumb loops help maintain sleeve position while gloves are donned

Individually packed and aseptically folded supply options available

お客様の製品に関する懸念事項

A sterile-supply garment must arrive in a configuration that supports the facility's aseptic donning sequence while limiting loose interfaces and unnecessary handling. Processing status, packaging layers and lot documentation must correspond to the actual supplied garment rather than a generic product description.

Multiple separate garments can complicate aseptic donning and create interface gaps.Use an integrated hooded coverall with attached footwear and compatible glove interfaces.

An exposed zipper or loose sleeve can contact critical surfaces during gowning.Specify a covered zipper, thumb loops and controlled elastic openings to stabilize garment position.

Packaging that does not match the gowning sequence can increase handling steps.Select individual, double-bagged or aseptically folded packaging based on the facility procedure.

Sterile status and processing traceability must correspond to the delivered lot.Supply the selected sterilization and lot documentation with the actual order rather than relying on generic claims.

典型的な用途

Used in aseptic pharmaceutical production, biotechnology, sterile medical-device operations, controlled laboratories and other processes that specify documented sterile cleanroom apparel.

技術的なパラメータ

These parameters describe an integrated hooded nonwoven coverall with footwear interfaces for documented sterile supply. Material, seam treatment, overall dimensions, folding method and packaging configuration are selected together for the intended aseptic workflow.

コア材料	Low-lint flash-spun polyethylene or cleanroom-compatible laminate nonwoven
パネルの厚さ	0.16–0.35 mm
有効幅	520–780 mm per laid-flat garment section
最大長さ	2100 mm including integrated hood and footwear
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	55–105 kg/m³ apparent material bulk density
熱伝導率	0.035–0.055 W/(m·K), material dependent
表面仕上げ	Smooth white low-lint surface with enclosed seam edges
ジョイントタイプ	Serged, bound or taped seams with covered front zipper and integrated hood/boots
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Attached hood with elastic or bound face openingAttached shoe covers or boot coversSerged, bound or taped seam constructionCovered thumb loopsIndividual or multi-layer packagingSterilization and processing configuration matched to order requirements

Planning a Sterile Cleanroom Garment specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する