EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Drainage, Hygiene and Safety Equipment
Stainless Steel Cleanroom Floor Drain
Hygienic 304 or 316L stainless floor drain with a removable grate and serviceable sediment basket for controlled-environment washdown areas.
- 304 or 316L Stainless Body
- Removable Grate and Basket
- Radiused Cleanable Sump
- Vertical or Horizontal Outlet
Product Introduction
This cleanroom floor drain uses a welded stainless body, smooth radiused sump and removable top components to keep routine inspection accessible. A square hygienic grate sits flush with the finished floor, while selectable outlet and flange arrangements allow the drain to suit resin, vinyl or tiled construction. Optional trapping and basket configurations address odor control and solids capture without hiding service components below an inaccessible cover.
Key Features
Radiused internal surfaces reduce sharp corners where wash residue can collect.
Pickled, passivated or satin stainless surfaces withstand frequent hygienic cleaning.
Vertical and horizontal outlets support different slab depths and drainage routes.
Customer Product Concerns
Wet clean areas need dependable drainage without concealed residue traps, incompatible materials or difficult-to-service internal parts.
Residue can remain beneath fixed grates and inaccessible strainers.The grate and basket lift out from above for direct cleaning and visual inspection.
Aggressive detergents can attack unsuitable drain bodies and seals.An optional 316L body and application-matched elastomers improve chemical compatibility.
Floor build-ups require different outlet directions and waterproofing details.Vertical or horizontal spigots and resin, vinyl or tile flanges adapt the drain to the floor assembly.
Sewer odors may migrate through intermittently used drain points.A removable water-seal trap can be added where the operating and maintenance regime supports it.
Typical Applications
Pharmaceutical wash roomsBiotechnology support areasFood-grade clean zonesEquipment wash bays
Technical Parameters
Typical construction ranges for a compact hygienic stainless floor drain are listed below; top size, outlet and flange are selected for the floor and expected flow.
| Core Material | AISI 304 or 316L stainless steel drain body |
|---|---|
| Panel Thickness | 1.5-2.0 mm body wall |
| Effective Width | 150-300 mm top width |
| Maximum Length | Up to 450 mm overall body length |
| Steel Facing Thickness | 1.5-2.0 mm exposed stainless surfaces |
| Core Density | 7900-8000 kg/m³ for stainless steel |
| Thermal Conductivity | 14-16 W/(m·K) for stainless steel |
| Surface Finish | Pickled and passivated or satin-finished stainless steel |
| Joint Type | Continuously welded sump with spigot or push-fit drainage outlet |
| Customization | Available based on the intended application and operating environment. |
Available Options
304 or 316L bodyRound or square topDN50-DN110 outletTrap, basket and membrane flange
Planning a Stainless Steel Cleanroom Floor Drain specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
