영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 배수, 위생 및 안전 장비
스테인레스 스틸 클린룸 바닥 배수
Hygienic 304 or 316L stainless floor drain with a removable grate and serviceable sediment basket for controlled-environment washdown areas.
- 304 or 316L Stainless Body
- Removable Grate and Basket
- Radiused Cleanable Sump
- Vertical or Horizontal Outlet
상품 소개
This cleanroom floor drain uses a welded stainless body, smooth radiused sump and removable top components to keep routine inspection accessible. A square hygienic grate sits flush with the finished floor, while selectable outlet and flange arrangements allow the drain to suit resin, vinyl or tiled construction. Optional trapping and basket configurations address odor control and solids capture without hiding service components below an inaccessible cover.
주요 기능
Radiused internal surfaces reduce sharp corners where wash residue can collect.
Pickled, passivated or satin stainless surfaces withstand frequent hygienic cleaning.
Vertical and horizontal outlets support different slab depths and drainage routes.
고객 제품 관심사
Wet clean areas need dependable drainage without concealed residue traps, incompatible materials or difficult-to-service internal parts.
Residue can remain beneath fixed grates and inaccessible strainers.The grate and basket lift out from above for direct cleaning and visual inspection.
Aggressive detergents can attack unsuitable drain bodies and seals.An optional 316L body and application-matched elastomers improve chemical compatibility.
Floor build-ups require different outlet directions and waterproofing details.Vertical or horizontal spigots and resin, vinyl or tile flanges adapt the drain to the floor assembly.
Sewer odors may migrate through intermittently used drain points.A removable water-seal trap can be added where the operating and maintenance regime supports it.
일반적인 응용 프로그램
Pharmaceutical wash roomsBiotechnology support areasFood-grade clean zonesEquipment wash bays
기술 매개변수
Typical construction ranges for a compact hygienic stainless floor drain are listed below; top size, outlet and flange are selected for the floor and expected flow.
| 핵심 재료 | AISI 304 or 316L stainless steel drain body |
|---|---|
| 패널 두께 | 1.5-2.0 mm body wall |
| 유효 폭 | 상단 폭 150 - 300 mm |
| 최대 길이 | Up to 450 mm overall body length |
| 강철 면면 두께 | 1. 5 - 2. 0 mm 노출된 스테인레스 표면 |
| 코어 밀도 | 7900 - 8000 kg / m 3 스테인레스 스틸 |
| 열전도도 (Thermal Conductivity) | 14 - 16 W / (m · K) 스테인레스 스틸 |
| 표면 마무리 | Pickled and passivated or satin - finished stainless steel |
| 접합 유형 | Continuously welded sump with spigot or push-fit drainage outlet |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
304 or 316L bodyRound or square topDN 50 - DN 110 소켓Trap, basket and membrane flange
Planning a Stainless Steel Cleanroom Floor Drain specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
