Complete stainless steel cleanroom floor drain in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

ステンレス鋼クリーンルームの床の排水口

Hygienic 304 or 316L stainless floor drain with a removable grate and serviceable sediment basket for controlled-environment washdown areas.

304 or 316L Stainless Body
Removable Grate and Basket
Radiused Cleanable Sump
Vertical or Horizontal Outlet

見積もりリクエスト製品案内

商品紹介

This cleanroom floor drain uses a welded stainless body, smooth radiused sump and removable top components to keep routine inspection accessible. A square hygienic grate sits flush with the finished floor, while selectable outlet and flange arrangements allow the drain to suit resin, vinyl or tiled construction. Optional trapping and basket configurations address odor control and solids capture without hiding service components below an inaccessible cover.

主要な特徴

A removable grate and sediment basket allow inspection and cleaning from floor level.

Radiused internal surfaces reduce sharp corners where wash residue can collect.

Pickled, passivated or satin stainless surfaces withstand frequent hygienic cleaning.

Vertical and horizontal outlets support different slab depths and drainage routes.

お客様の製品に関する懸念事項

Wet clean areas need dependable drainage without concealed residue traps, incompatible materials or difficult-to-service internal parts.

Residue can remain beneath fixed grates and inaccessible strainers.The grate and basket lift out from above for direct cleaning and visual inspection.

Aggressive detergents can attack unsuitable drain bodies and seals.An optional 316L body and application-matched elastomers improve chemical compatibility.

Floor build-ups require different outlet directions and waterproofing details.Vertical or horizontal spigots and resin, vinyl or tile flanges adapt the drain to the floor assembly.

Sewer odors may migrate through intermittently used drain points.A removable water-seal trap can be added where the operating and maintenance regime supports it.

典型的な用途

Pharmaceutical wash roomsBiotechnology support areasFood-grade clean zonesEquipment wash bays

技術的なパラメータ

Typical construction ranges for a compact hygienic stainless floor drain are listed below; top size, outlet and flange are selected for the floor and expected flow.

コア材料	AISI 304 or 316L stainless steel drain body
パネルの厚さ	1.5-2.0 mm body wall
有効幅	150 — 300 mm の上部幅
最大長さ	Up to 450 mm overall body length
鋼鉄の厚さを直面する	1.5 — 2.0 mm 露出したステンレス表面
コア密度	ステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	14 — 16 W / （ m · K ）ステンレス鋼
表面仕上げ	酸漬け、不動態化またはサテン仕上げステンレス鋼
ジョイントタイプ	Continuously welded sump with spigot or push-fit drainage outlet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

304 or 316L bodyRound or square topDN50—DN110 の出口Trap, basket and membrane flange

Planning a Stainless Steel Cleanroom Floor Drain specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する