English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
الفولاذ المقاوم للصدأ غرف الأبحاث الطابق استنزاف
Hygienic 304 or 316L stainless floor drain with a removable grate and serviceable sediment basket for controlled-environment washdown areas.
- 304 or 316L Stainless Body
- Removable Grate and Basket
- Radiused Cleanable Sump
- Vertical or Horizontal Outlet
مقدمة المنتج
This cleanroom floor drain uses a welded stainless body, smooth radiused sump and removable top components to keep routine inspection accessible. A square hygienic grate sits flush with the finished floor, while selectable outlet and flange arrangements allow the drain to suit resin, vinyl or tiled construction. Optional trapping and basket configurations address odor control and solids capture without hiding service components below an inaccessible cover.
الخصائص الرئيسية
Radiused internal surfaces reduce sharp corners where wash residue can collect.
Pickled, passivated or satin stainless surfaces withstand frequent hygienic cleaning.
Vertical and horizontal outlets support different slab depths and drainage routes.
مخاوف المنتج للعملاء
Wet clean areas need dependable drainage without concealed residue traps, incompatible materials or difficult-to-service internal parts.
Residue can remain beneath fixed grates and inaccessible strainers.The grate and basket lift out from above for direct cleaning and visual inspection.
Aggressive detergents can attack unsuitable drain bodies and seals.An optional 316L body and application-matched elastomers improve chemical compatibility.
Floor build-ups require different outlet directions and waterproofing details.Vertical or horizontal spigots and resin, vinyl or tile flanges adapt the drain to the floor assembly.
Sewer odors may migrate through intermittently used drain points.A removable water-seal trap can be added where the operating and maintenance regime supports it.
تطبيقات نموذجية
Pharmaceutical wash roomsBiotechnology support areasFood-grade clean zonesEquipment wash bays
المعلمات الفنية
Typical construction ranges for a compact hygienic stainless floor drain are listed below; top size, outlet and flange are selected for the floor and expected flow.
| المواد الأساسية | AISI 304 or 316L stainless steel drain body |
|---|---|
| سمك اللوحة | 1.5-2.0 mm body wall |
| العرض الفعال | 150-300 mm top width |
| الحد الأقصى الطول | Up to 450 mm overall body length |
| الصلب يواجه سمك | 1.5-2.0 mm exposed stainless surfaces |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless steel |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless steel |
| إنهاء السطح | Pickled and passivated or satin-finished stainless steel |
| نوع المشترك | Continuously welded sump with spigot or push-fit drainage outlet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L bodyRound or square topDN50-DN110 outletTrap, basket and membrane flange
Planning a Stainless Steel Cleanroom Floor Drain specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
