Cleanroom Garments, PPE and Consumables

Disposable Cleanroom Mop Pad

Single-use white cleanroom mop pad with a hydroentangled polyester/cellulose face, absorbent synthetic core and twin pockets for compatible flat mop frames.

Single-use construction reduces contamination carryover between cleaning zones
Polyester/cellulose nonwoven face combines solution sorbency with wet strength
Quilted fiberfill core supports even liquid distribution across broad surfaces

Request a Quote Browse Products

Product Introduction

The Disposable Cleanroom Mop Pad is a low-profile pocket-style cover intended for one cleaning session or a defined room transition. Its white hydroentangled polyester/cellulose working layer combines the sorbency of cellulose with polyester wet strength, while a thin synthetic fiberfill core helps carry solution across the full rectangular face. Straight quilt channels stabilize the layers, a sealed and stitched perimeter controls the pad shape, and two shallow end pockets retain a compatible collapsible flat mop frame.

Key Features

New pad for each use simplifies segregation between rooms, process stages or soil levels

Hydroentangled polyester/cellulose face absorbs cleaning solution and resists tearing when wet

Thin quilted core promotes uniform surface contact without a bulky sponge profile

Twin end pockets permit fast installation on a compatible collapsible flat frame

All-white construction makes visible residue easier to detect during controlled cleaning

Customer Product Concerns

Reprocessed mop heads can carry retained soil, chemistry or microorganisms into the next area. A disposable pad must still maintain adequate wet strength, liquid distribution and frame fit throughout the planned cleaning pass.

Reusing a pad across zones can transfer residual contamination.Assign one pad to each defined cleaning session or room sequence and discard it afterward.

A weak nonwoven face may tear or distort after absorbing disinfectant.Select a hydroentangled polyester/cellulose face with a synthetic reinforcing core for wet use.

Poor internal distribution can leave streaks or inconsistent wet contact.Use stabilized quilt channels and controlled core thickness to spread solution across the wiping face.

An incorrect pocket size may release from the mop frame during use.Match the finished length, width and pocket depth to the intended collapsible flat frame.

Typical Applications

Used for single-session wet cleaning, disinfectant application and residue removal on cleanroom floors, walls and ceilings in pharmaceutical production, biotechnology suites, compounding areas, medical-device facilities, laboratories and controlled electronics manufacturing.

Technical Parameters

These ranges describe common single-use polyester/cellulose flat mop pads with a quilted absorbent core. Finished dimensions, material blend, attachment pockets, irradiation and packaging can be configured for the facility cleaning procedure.

Core Material	Hydroentangled polyester/cellulose nonwoven face over synthetic polyester fiberfill
Panel Thickness	5–12 mm
Effective Width	100–150 mm
Maximum Length	500 mm
Steel Facing Thickness	0 mm; no steel facing used
Core Density	30–70 kg/m³ apparent fiberfill density
Thermal Conductivity	0.035–0.060 W/(m·K), dry multilayer reference range
Surface Finish	White quilted low-lint nonwoven wiping face with sealed bound perimeter
Joint Type	Stitched or thermally sealed multilayer construction with twin end pockets
Customization	Available based on the intended application and operating environment.

Available Options

Alternative polyester/cellulose blend ratiosFully synthetic microfiber faceDifferent pad lengths, widths and pocket depthsDry or compatible pre-saturated configurationsIrradiated and non-irradiated supply formatsIndividual, double-bagged or bulk cleanroom packaging

Planning a Disposable Cleanroom Mop Pad specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team