Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Prendas de sala limpia, EPP y consumibles
Disposable Cleanroom Mop Pad
Single-use white cleanroom mop pad with a hydroentangled polyester/cellulose face, absorbent synthetic core and twin pockets for compatible flat mop frames.
- Single-use construction reduces contamination carryover between cleaning zones
- Polyester/cellulose nonwoven face combines solution sorbency with wet strength
- Quilted fiberfill core supports even liquid distribution across broad surfaces
Introducción del producto
The Disposable Cleanroom Mop Pad is a low-profile pocket-style cover intended for one cleaning session or a defined room transition. Its white hydroentangled polyester/cellulose working layer combines the sorbency of cellulose with polyester wet strength, while a thin synthetic fiberfill core helps carry solution across the full rectangular face. Straight quilt channels stabilize the layers, a sealed and stitched perimeter controls the pad shape, and two shallow end pockets retain a compatible collapsible flat mop frame.
Características clave
Hydroentangled polyester/cellulose face absorbs cleaning solution and resists tearing when wet
Thin quilted core promotes uniform surface contact without a bulky sponge profile
Twin end pockets permit fast installation on a compatible collapsible flat frame
All-white construction makes visible residue easier to detect during controlled cleaning
Preocupaciones del producto del cliente
Reprocessed mop heads can carry retained soil, chemistry or microorganisms into the next area. A disposable pad must still maintain adequate wet strength, liquid distribution and frame fit throughout the planned cleaning pass.
Reusing a pad across zones can transfer residual contamination.Assign one pad to each defined cleaning session or room sequence and discard it afterward.
A weak nonwoven face may tear or distort after absorbing disinfectant.Select a hydroentangled polyester/cellulose face with a synthetic reinforcing core for wet use.
Poor internal distribution can leave streaks or inconsistent wet contact.Use stabilized quilt channels and controlled core thickness to spread solution across the wiping face.
An incorrect pocket size may release from the mop frame during use.Match the finished length, width and pocket depth to the intended collapsible flat frame.
Aplicaciones típicas
Used for single-session wet cleaning, disinfectant application and residue removal on cleanroom floors, walls and ceilings in pharmaceutical production, biotechnology suites, compounding areas, medical-device facilities, laboratories and controlled electronics manufacturing.
Parámetros técnicos
These ranges describe common single-use polyester/cellulose flat mop pads with a quilted absorbent core. Finished dimensions, material blend, attachment pockets, irradiation and packaging can be configured for the facility cleaning procedure.
| Materiales Core | Hydroentangled polyester/cellulose nonwoven face over synthetic polyester fiberfill |
|---|---|
| Panel de espesor | 5–12 mm |
| Ancho efectivo | 100–150 mm |
| Longitud máxima | 500 mm |
| Acero frente a espesor | 0 mm; no steel facing used |
| Densidad Core | 30–70 kg/m³ apparent fiberfill density |
| Conductividad térmica | 0.035–0.060 W/(m·K), dry multilayer reference range |
| Superficie acabada | White quilted low-lint nonwoven wiping face with sealed bound perimeter |
| Tipo conjunto | Stitched or thermally sealed multilayer construction with twin end pockets |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Alternative polyester/cellulose blend ratiosFully synthetic microfiber faceDifferent pad lengths, widths and pocket depthsDry or compatible pre-saturated configurationsIrradiated and non-irradiated supply formatsIndividual, double-bagged or bulk cleanroom packaging
Planning a Disposable Cleanroom Mop Pad specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
