Three-quarter view of a complete white disposable cleanroom mop pad

クリーンルーム衣料品、 PPE 、消耗品

Disposable クリーンルームのモップパッド

Single-use white cleanroom mop pad with a hydroentangled polyester/cellulose face, absorbent synthetic core and twin pockets for compatible flat mop frames.

Single-use construction reduces contamination carryover between cleaning zones
Polyester/cellulose nonwoven face combines solution sorbency with wet strength
Quilted fiberfill core supports even liquid distribution across broad surfaces

見積もりリクエスト製品案内

商品紹介

The Disposable Cleanroom Mop Pad is a low-profile pocket-style cover intended for one cleaning session or a defined room transition. Its white hydroentangled polyester/cellulose working layer combines the sorbency of cellulose with polyester wet strength, while a thin synthetic fiberfill core helps carry solution across the full rectangular face. Straight quilt channels stabilize the layers, a sealed and stitched perimeter controls the pad shape, and two shallow end pockets retain a compatible collapsible flat mop frame.

主要な特徴

New pad for each use simplifies segregation between rooms, process stages or soil levels

Hydroentangled polyester/cellulose face absorbs cleaning solution and resists tearing when wet

Thin quilted core promotes uniform surface contact without a bulky sponge profile

Twin end pockets permit fast installation on a compatible collapsible flat frame

All-white construction makes visible residue easier to detect during controlled cleaning

お客様の製品に関する懸念事項

Reprocessed mop heads can carry retained soil, chemistry or microorganisms into the next area. A disposable pad must still maintain adequate wet strength, liquid distribution and frame fit throughout the planned cleaning pass.

Reusing a pad across zones can transfer residual contamination.Assign one pad to each defined cleaning session or room sequence and discard it afterward.

A weak nonwoven face may tear or distort after absorbing disinfectant.Select a hydroentangled polyester/cellulose face with a synthetic reinforcing core for wet use.

Poor internal distribution can leave streaks or inconsistent wet contact.Use stabilized quilt channels and controlled core thickness to spread solution across the wiping face.

An incorrect pocket size may release from the mop frame during use.Match the finished length, width and pocket depth to the intended collapsible flat frame.

典型的な用途

Used for single-session wet cleaning, disinfectant application and residue removal on cleanroom floors, walls and ceilings in pharmaceutical production, biotechnology suites, compounding areas, medical-device facilities, laboratories and controlled electronics manufacturing.

技術的なパラメータ

These ranges describe common single-use polyester/cellulose flat mop pads with a quilted absorbent core. Finished dimensions, material blend, attachment pockets, irradiation and packaging can be configured for the facility cleaning procedure.

コア材料	Hydroentangled polyester/cellulose nonwoven face over synthetic polyester fiberfill
パネルの厚さ	5–12 mm
有効幅	100–150 mm
最大長さ	500 mm
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	30–70 kg/m³ apparent fiberfill density
熱伝導率	0.035–0.060 W/(m·K), dry multilayer reference range
表面仕上げ	White quilted low-lint nonwoven wiping face with sealed bound perimeter
ジョイントタイプ	Stitched or thermally sealed multilayer construction with twin end pockets
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Alternative polyester/cellulose blend ratiosFully synthetic microfiber faceDifferent pad lengths, widths and pocket depthsDry or compatible pre-saturated configurationsIrradiated and non-irradiated supply formatsIndividual, double-bagged or bulk cleanroom packaging

Planning a Disposable Cleanroom Mop Pad specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する