English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
المتاح غرف الأبحاث ممسحة وسادة
Single-use white cleanroom mop pad with a hydroentangled polyester/cellulose face, absorbent synthetic core and twin pockets for compatible flat mop frames.
- Single-use construction reduces contamination carryover between cleaning zones
- Polyester/cellulose nonwoven face combines solution sorbency with wet strength
- Quilted fiberfill core supports even liquid distribution across broad surfaces
مقدمة المنتج
The Disposable Cleanroom Mop Pad is a low-profile pocket-style cover intended for one cleaning session or a defined room transition. Its white hydroentangled polyester/cellulose working layer combines the sorbency of cellulose with polyester wet strength, while a thin synthetic fiberfill core helps carry solution across the full rectangular face. Straight quilt channels stabilize the layers, a sealed and stitched perimeter controls the pad shape, and two shallow end pockets retain a compatible collapsible flat mop frame.
الخصائص الرئيسية
Hydroentangled polyester/cellulose face absorbs cleaning solution and resists tearing when wet
Thin quilted core promotes uniform surface contact without a bulky sponge profile
Twin end pockets permit fast installation on a compatible collapsible flat frame
All-white construction makes visible residue easier to detect during controlled cleaning
مخاوف المنتج للعملاء
Reprocessed mop heads can carry retained soil, chemistry or microorganisms into the next area. A disposable pad must still maintain adequate wet strength, liquid distribution and frame fit throughout the planned cleaning pass.
Reusing a pad across zones can transfer residual contamination.Assign one pad to each defined cleaning session or room sequence and discard it afterward.
A weak nonwoven face may tear or distort after absorbing disinfectant.Select a hydroentangled polyester/cellulose face with a synthetic reinforcing core for wet use.
Poor internal distribution can leave streaks or inconsistent wet contact.Use stabilized quilt channels and controlled core thickness to spread solution across the wiping face.
An incorrect pocket size may release from the mop frame during use.Match the finished length, width and pocket depth to the intended collapsible flat frame.
تطبيقات نموذجية
Used for single-session wet cleaning, disinfectant application and residue removal on cleanroom floors, walls and ceilings in pharmaceutical production, biotechnology suites, compounding areas, medical-device facilities, laboratories and controlled electronics manufacturing.
المعلمات الفنية
These ranges describe common single-use polyester/cellulose flat mop pads with a quilted absorbent core. Finished dimensions, material blend, attachment pockets, irradiation and packaging can be configured for the facility cleaning procedure.
| المواد الأساسية | Hydroentangled polyester/cellulose nonwoven face over synthetic polyester fiberfill |
|---|---|
| سمك اللوحة | 5–12 mm |
| العرض الفعال | 100–150 mm |
| الحد الأقصى الطول | 500 mm |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 30–70 kg/m³ apparent fiberfill density |
| الموصلية الحرارية | 0.035–0.060 W/(m·K), dry multilayer reference range |
| إنهاء السطح | White quilted low-lint nonwoven wiping face with sealed bound perimeter |
| نوع المشترك | Stitched or thermally sealed multilayer construction with twin end pockets |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Alternative polyester/cellulose blend ratiosFully synthetic microfiber faceDifferent pad lengths, widths and pocket depthsDry or compatible pre-saturated configurationsIrradiated and non-irradiated supply formatsIndividual, double-bagged or bulk cleanroom packaging
Planning a Disposable Cleanroom Mop Pad specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
