Cleanroom Garments, PPE and Consumables

Cleanroom Sleeve Cover

A low-lint cleanroom sleeve cover that adds targeted forearm protection over compatible controlled-environment garments.

Extended forearm barrier for controlled tasks
Covered elastic openings help limit sleeve movement
Low-lint disposable construction

Request a Quote Browse Products

Product Introduction

The Cleanroom Sleeve Cover provides a simple secondary barrier where operator sleeves approach work surfaces, open product or cleaning solutions. Its white flash-spun polyethylene body combines low weight with particle and limited liquid-splash resistance, while covered elastic at the wrist and upper arm helps maintain overlap with gloves and the base garment. Bound-seam and clean-processed options support more demanding gowning programs without adding a full coverall.

Key Features

Long tubular cut protects the wrist, forearm and lower upper arm

Covered elastic ends reduce exposed elastic and help retain position

Smooth white material makes contamination easier to observe

Bound-seam option reduces exposed seam edges

Ambidextrous format simplifies inventory and dispensing

Customer Product Concerns

Sleeve covers must stay in place without creating uncomfortable pressure or leaving a gap at the glove. Their material, seam and packaging condition must also suit the cleanliness and exposure level of the task.

The upper opening may slide down during repeated arm movement.Use a covered elastic upper opening sized for secure but comfortable retention.

A short sleeve can separate from the glove cuff when the wrist bends.Select extended length with sufficient glove-cuff overlap throughout the working reach.

Exposed elastic or rough seams may introduce fibers near the process.Specify covered elastic and bound or carefully finished seams for the intended clean zone.

A general-purpose material may not provide the required particle or splash barrier.Match flash-spun polyethylene, coated film or reusable conductive fabric to the verified task exposure.

Typical Applications

Suitable for pharmaceutical and biotechnology processing, medical-device assembly, clean packing, laboratory preparation, electronics handling and controlled cleaning tasks that require additional arm coverage.

Technical Parameters

The following configurable values describe a disposable cleanroom sleeve cover. Dimensions and construction can be adapted to the operator garment system and the required overlap.

Core Material	Flash-spun high-density polyethylene nonwoven
Panel Thickness	0.12–0.22 mm
Effective Width	220–300 mm when laid flat
Maximum Length	550 mm
Steel Facing Thickness	0 mm; no steel facing used
Core Density	55–85 kg/m³ apparent material bulk density
Thermal Conductivity	0.035–0.055 W/(m·K), material dependent
Surface Finish	Smooth low-lint white surface with covered elastic ends
Joint Type	Tubular sleeve with bound longitudinal seam and elasticated openings
Customization	Available based on the intended application and operating environment.

Available Options

Clean-processed or standard controlled-environment packagingSterile or non-sterile supply configurationBound or serged seam constructionThumb-loop option for improved glove overlapAlternative length and opening dimensionsWhite, light-blue or application-specific material color

Planning a Cleanroom Sleeve Cover specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team