English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Обложка рукава для чистых помещений
A low-lint cleanroom sleeve cover that adds targeted forearm protection over compatible controlled-environment garments.
- Extended forearm barrier for controlled tasks
- Covered elastic openings help limit sleeve movement
- Low-lint disposable construction
Введение продукции
The Cleanroom Sleeve Cover provides a simple secondary barrier where operator sleeves approach work surfaces, open product or cleaning solutions. Its white flash-spun polyethylene body combines low weight with particle and limited liquid-splash resistance, while covered elastic at the wrist and upper arm helps maintain overlap with gloves and the base garment. Bound-seam and clean-processed options support more demanding gowning programs without adding a full coverall.
Основные характеристики
Covered elastic ends reduce exposed elastic and help retain position
Smooth white material makes contamination easier to observe
Bound-seam option reduces exposed seam edges
Ambidextrous format simplifies inventory and dispensing
Обеспокоенность клиентов продуктами
Sleeve covers must stay in place without creating uncomfortable pressure or leaving a gap at the glove. Their material, seam and packaging condition must also suit the cleanliness and exposure level of the task.
The upper opening may slide down during repeated arm movement.Use a covered elastic upper opening sized for secure but comfortable retention.
A short sleeve can separate from the glove cuff when the wrist bends.Select extended length with sufficient glove-cuff overlap throughout the working reach.
Exposed elastic or rough seams may introduce fibers near the process.Specify covered elastic and bound or carefully finished seams for the intended clean zone.
A general-purpose material may not provide the required particle or splash barrier.Match flash-spun polyethylene, coated film or reusable conductive fabric to the verified task exposure.
Типичные приложения
Suitable for pharmaceutical and biotechnology processing, medical-device assembly, clean packing, laboratory preparation, electronics handling and controlled cleaning tasks that require additional arm coverage.
Технические параметры
The following configurable values describe a disposable cleanroom sleeve cover. Dimensions and construction can be adapted to the operator garment system and the required overlap.
| Основной материал | Flash-spun high-density polyethylene nonwoven |
|---|---|
| Толщина панели | 0.12–0.22 mm |
| эффективная ширина | 220–300 mm when laid flat |
| Максимальная длина | 550 mm |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 55–85 kg/m³ apparent material bulk density |
| Теплопроводимость | 0.035–0.055 W/(m·K), material dependent |
| Поверхностная отделка | Smooth low-lint white surface with covered elastic ends |
| Объединенный тип | Tubular sleeve with bound longitudinal seam and elasticated openings |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Clean-processed or standard controlled-environment packagingSterile or non-sterile supply configurationBound or serged seam constructionThumb-loop option for improved glove overlapAlternative length and opening dimensionsWhite, light-blue or application-specific material color
Planning a Cleanroom Sleeve Cover specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
