Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom sleeve couverture
A low-lint cleanroom sleeve cover that adds targeted forearm protection over compatible controlled-environment garments.
- Extended forearm barrier for controlled tasks
- Covered elastic openings help limit sleeve movement
- Low-lint disposable construction
Introduction de produit
The Cleanroom Sleeve Cover provides a simple secondary barrier where operator sleeves approach work surfaces, open product or cleaning solutions. Its white flash-spun polyethylene body combines low weight with particle and limited liquid-splash resistance, while covered elastic at the wrist and upper arm helps maintain overlap with gloves and the base garment. Bound-seam and clean-processed options support more demanding gowning programs without adding a full coverall.
Key Features
Covered elastic ends reduce exposed elastic and help retain position
Smooth white material makes contamination easier to observe
Bound-seam option reduces exposed seam edges
Ambidextrous format simplifies inventory and dispensing
Préoccupations du client produit
Sleeve covers must stay in place without creating uncomfortable pressure or leaving a gap at the glove. Their material, seam and packaging condition must also suit the cleanliness and exposure level of the task.
The upper opening may slide down during repeated arm movement.Use a covered elastic upper opening sized for secure but comfortable retention.
A short sleeve can separate from the glove cuff when the wrist bends.Select extended length with sufficient glove-cuff overlap throughout the working reach.
Exposed elastic or rough seams may introduce fibers near the process.Specify covered elastic and bound or carefully finished seams for the intended clean zone.
A general-purpose material may not provide the required particle or splash barrier.Match flash-spun polyethylene, coated film or reusable conductive fabric to the verified task exposure.
Les applications typiques
Suitable for pharmaceutical and biotechnology processing, medical-device assembly, clean packing, laboratory preparation, electronics handling and controlled cleaning tasks that require additional arm coverage.
Paramètres techniques
The following configurable values describe a disposable cleanroom sleeve cover. Dimensions and construction can be adapted to the operator garment system and the required overlap.
| Matériaux de base | Flash-spun high-density polyethylene nonwoven |
|---|---|
| Panneau épaisseur | 0.12–0.22 mm |
| Largeur effective | 220–300 mm when laid flat |
| Longueur maximale | 550 mm |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 55–85 kg/m³ apparent material bulk density |
| Conductivité thermique | 0.035–0.055 W/(m·K), material dependent |
| surface finie | Smooth low-lint white surface with covered elastic ends |
| Type joint | Tubular sleeve with bound longitudinal seam and elasticated openings |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Clean-processed or standard controlled-environment packagingSterile or non-sterile supply configurationBound or serged seam constructionThumb-loop option for improved glove overlapAlternative length and opening dimensionsWhite, light-blue or application-specific material color
Planning a Cleanroom Sleeve Cover specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
