EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Cleanroom Label
White polypropylene cleanroom labels supplied on a PET-lined roll with a removable acrylic adhesive for controlled identification and traceability.
- Low-shedding synthetic face stock for controlled identification
- Clean-removal acrylic adhesive for temporary traceability
- Thermal-transfer surface supports legible text and barcodes
Product Introduction
The Cleanroom Label combines a moisture-resistant synthetic face stock with a pressure-sensitive acrylic adhesive selected for clean removal from suitable smooth surfaces. A printable matte coating accepts thermal-transfer text, lot codes and barcodes without relying on fibrous paper stock. Labels are wound on a plastic core and can be double bagged to simplify material transfer into controlled production areas.
Key Features
Removable acrylic adhesive supports relabeling without persistent residue
Clear PET release liner minimizes paper-fiber introduction
Matte white face provides contrast for barcodes and small characters
Roll format works with compatible thermal-transfer printers and dispensers
Customer Product Concerns
Ordinary paper labels can shed fibers, absorb moisture or leave adhesive residue on containers and equipment. Cleanroom identification also depends on print contrast and label retention throughout the intended handling interval.
Fibrous face stock may introduce particles during peeling and application.Use a synthetic polypropylene face and PET liner supplied in clean packaging.
Excessive adhesion can leave residue on reusable bins or smooth equipment panels.Select removable acrylic adhesive and verify dwell time on the actual substrate.
Poor ribbon compatibility can produce unreadable barcodes or smudged lot data.Qualify the printer, ribbon and print-energy setting as one labeling system.
A label selected for a flat surface may lift when applied to a tight-radius vial.Match label dimensions and adhesive grade to container diameter and surface energy.
Typical Applications
Designed for lot identification, work-in-process bins, sample containers, equipment status, material-transfer bags, component trays, laboratory vessels and temporary barcode tracking in controlled areas.
Technical Parameters
These specifications describe a common removable thermal-transfer cleanroom label roll. Dimensions, adhesive strength and packaging can be adjusted after evaluating the actual substrate, temperature and traceability interval.
| Core Material | Matte white opaque polypropylene face stock on clear PET release liner |
|---|---|
| Panel Thickness | 0.09 mm nominal face stock plus adhesive |
| Effective Width | 25-102 mm label width |
| Maximum Length | 152 mm label length |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 900-930 kg/m³ polypropylene face stock |
| Thermal Conductivity | 0.10-0.22 W/(m·K), polymer grade dependent |
| Surface Finish | Matte white thermal-transfer printable topcoat |
| Joint Type | Removable pressure-sensitive acrylic adhesive on PET release liner |
| Customization | Available based on the intended application and operating environment. |
Available Options
Polypropylene, polyester or spunbond polyolefin face stockRemovable, permanent or tamper-evident acrylic adhesiveBlank or preprinted labelsCustom die-cut dimensions and roll countsThermal-transfer or direct-thermal printable coatingDouble-bagged or irradiated presentation where required
Planning a Cleanroom Label specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
