English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
التسمية الغرف النظيفة
White polypropylene cleanroom labels supplied on a PET-lined roll with a removable acrylic adhesive for controlled identification and traceability.
- Low-shedding synthetic face stock for controlled identification
- Clean-removal acrylic adhesive for temporary traceability
- Thermal-transfer surface supports legible text and barcodes
مقدمة المنتج
The Cleanroom Label combines a moisture-resistant synthetic face stock with a pressure-sensitive acrylic adhesive selected for clean removal from suitable smooth surfaces. A printable matte coating accepts thermal-transfer text, lot codes and barcodes without relying on fibrous paper stock. Labels are wound on a plastic core and can be double bagged to simplify material transfer into controlled production areas.
الخصائص الرئيسية
Removable acrylic adhesive supports relabeling without persistent residue
Clear PET release liner minimizes paper-fiber introduction
Matte white face provides contrast for barcodes and small characters
Roll format works with compatible thermal-transfer printers and dispensers
مخاوف المنتج للعملاء
Ordinary paper labels can shed fibers, absorb moisture or leave adhesive residue on containers and equipment. Cleanroom identification also depends on print contrast and label retention throughout the intended handling interval.
Fibrous face stock may introduce particles during peeling and application.Use a synthetic polypropylene face and PET liner supplied in clean packaging.
Excessive adhesion can leave residue on reusable bins or smooth equipment panels.Select removable acrylic adhesive and verify dwell time on the actual substrate.
Poor ribbon compatibility can produce unreadable barcodes or smudged lot data.Qualify the printer, ribbon and print-energy setting as one labeling system.
A label selected for a flat surface may lift when applied to a tight-radius vial.Match label dimensions and adhesive grade to container diameter and surface energy.
تطبيقات نموذجية
Designed for lot identification, work-in-process bins, sample containers, equipment status, material-transfer bags, component trays, laboratory vessels and temporary barcode tracking in controlled areas.
المعلمات الفنية
These specifications describe a common removable thermal-transfer cleanroom label roll. Dimensions, adhesive strength and packaging can be adjusted after evaluating the actual substrate, temperature and traceability interval.
| المواد الأساسية | Matte white opaque polypropylene face stock on clear PET release liner |
|---|---|
| سمك اللوحة | 0.09 mm nominal face stock plus adhesive |
| العرض الفعال | 25-102 mm label width |
| الحد الأقصى الطول | 152 mm label length |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 900-930 kg/m³ polypropylene face stock |
| الموصلية الحرارية | 0.10-0.22 W/(m·K), polymer grade dependent |
| إنهاء السطح | Matte white thermal-transfer printable topcoat |
| نوع المشترك | Removable pressure-sensitive acrylic adhesive on PET release liner |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Polypropylene, polyester or spunbond polyolefin face stockRemovable, permanent or tamper-evident acrylic adhesiveBlank or preprinted labelsCustom die-cut dimensions and roll countsThermal-transfer or direct-thermal printable coatingDouble-bagged or irradiated presentation where required
Planning a Cleanroom Label specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
