White cleanroom label roll with visible blank polypropylene labels in three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Label bilik bersih

White polypropylene cleanroom labels supplied on a PET-lined roll with a removable acrylic adhesive for controlled identification and traceability.

Low-shedding synthetic face stock for controlled identification
Clean-removal acrylic adhesive for temporary traceability
Thermal-transfer surface supports legible text and barcodes

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Cleanroom Label combines a moisture-resistant synthetic face stock with a pressure-sensitive acrylic adhesive selected for clean removal from suitable smooth surfaces. A printable matte coating accepts thermal-transfer text, lot codes and barcodes without relying on fibrous paper stock. Labels are wound on a plastic core and can be double bagged to simplify material transfer into controlled production areas.

Ciri-ciri Utama

Opaque polypropylene film resists routine moisture and handling

Removable acrylic adhesive supports relabeling without persistent residue

Clear PET release liner minimizes paper-fiber introduction

Matte white face provides contrast for barcodes and small characters

Roll format works with compatible thermal-transfer printers and dispensers

Kebimbangan Produk Pelanggan

Ordinary paper labels can shed fibers, absorb moisture or leave adhesive residue on containers and equipment. Cleanroom identification also depends on print contrast and label retention throughout the intended handling interval.

Fibrous face stock may introduce particles during peeling and application.Use a synthetic polypropylene face and PET liner supplied in clean packaging.

Excessive adhesion can leave residue on reusable bins or smooth equipment panels.Select removable acrylic adhesive and verify dwell time on the actual substrate.

Poor ribbon compatibility can produce unreadable barcodes or smudged lot data.Qualify the printer, ribbon and print-energy setting as one labeling system.

A label selected for a flat surface may lift when applied to a tight-radius vial.Match label dimensions and adhesive grade to container diameter and surface energy.

Permohonan yang biasa

Designed for lot identification, work-in-process bins, sample containers, equipment status, material-transfer bags, component trays, laboratory vessels and temporary barcode tracking in controlled areas.

Parameter teknikal

These specifications describe a common removable thermal-transfer cleanroom label roll. Dimensions, adhesive strength and packaging can be adjusted after evaluating the actual substrate, temperature and traceability interval.

Bahan Teras	Matte white opaque polypropylene face stock on clear PET release liner
Ketebalan Panel	0.09 mm nominal face stock plus adhesive
Lebar berkesan	25-102 mm label width
Panjang maksimum	152 mm label length
Keluli Menghadapi Ketebalan	0 mm; tiada keluli menghadap digunakan
Ketumpatan teras	900-930 kg/m³ polypropylene face stock
Kekonduksian Terma	0.10-0.22 W/(m·K), polymer grade dependent
Kemasan permukaan	Matte white thermal-transfer printable topcoat
Jenis Bersatu	Removable pressure-sensitive acrylic adhesive on PET release liner
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Polypropylene, polyester or spunbond polyolefin face stockRemovable, permanent or tamper-evident acrylic adhesiveBlank or preprinted labelsCustom die-cut dimensions and roll countsThermal-transfer or direct-thermal printable coatingDouble-bagged or irradiated presentation where required

Planning a Cleanroom Label specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami