English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Лекция чистой комнаты
White polypropylene cleanroom labels supplied on a PET-lined roll with a removable acrylic adhesive for controlled identification and traceability.
- Low-shedding synthetic face stock for controlled identification
- Clean-removal acrylic adhesive for temporary traceability
- Thermal-transfer surface supports legible text and barcodes
Введение продукции
The Cleanroom Label combines a moisture-resistant synthetic face stock with a pressure-sensitive acrylic adhesive selected for clean removal from suitable smooth surfaces. A printable matte coating accepts thermal-transfer text, lot codes and barcodes without relying on fibrous paper stock. Labels are wound on a plastic core and can be double bagged to simplify material transfer into controlled production areas.
Основные характеристики
Removable acrylic adhesive supports relabeling without persistent residue
Clear PET release liner minimizes paper-fiber introduction
Matte white face provides contrast for barcodes and small characters
Roll format works with compatible thermal-transfer printers and dispensers
Обеспокоенность клиентов продуктами
Ordinary paper labels can shed fibers, absorb moisture or leave adhesive residue on containers and equipment. Cleanroom identification also depends on print contrast and label retention throughout the intended handling interval.
Fibrous face stock may introduce particles during peeling and application.Use a synthetic polypropylene face and PET liner supplied in clean packaging.
Excessive adhesion can leave residue on reusable bins or smooth equipment panels.Select removable acrylic adhesive and verify dwell time on the actual substrate.
Poor ribbon compatibility can produce unreadable barcodes or smudged lot data.Qualify the printer, ribbon and print-energy setting as one labeling system.
A label selected for a flat surface may lift when applied to a tight-radius vial.Match label dimensions and adhesive grade to container diameter and surface energy.
Типичные приложения
Designed for lot identification, work-in-process bins, sample containers, equipment status, material-transfer bags, component trays, laboratory vessels and temporary barcode tracking in controlled areas.
Технические параметры
These specifications describe a common removable thermal-transfer cleanroom label roll. Dimensions, adhesive strength and packaging can be adjusted after evaluating the actual substrate, temperature and traceability interval.
| Основной материал | Matte white opaque polypropylene face stock on clear PET release liner |
|---|---|
| Толщина панели | 0.09 mm nominal face stock plus adhesive |
| эффективная ширина | 25-102 mm label width |
| Максимальная длина | 152 mm label length |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 900-930 kg/m³ polypropylene face stock |
| Теплопроводимость | 0.10-0.22 W/(m·K), polymer grade dependent |
| Поверхностная отделка | Matte white thermal-transfer printable topcoat |
| Объединенный тип | Removable pressure-sensitive acrylic adhesive on PET release liner |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Polypropylene, polyester or spunbond polyolefin face stockRemovable, permanent or tamper-evident acrylic adhesiveBlank or preprinted labelsCustom die-cut dimensions and roll countsThermal-transfer or direct-thermal printable coatingDouble-bagged or irradiated presentation where required
Planning a Cleanroom Label specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
