Cleanroom Garments, PPE and Consumables

Cleanroom Coverall

A full-body cleanroom coverall designed to reduce contamination transfer from personnel while supporting comfortable movement during controlled-environment operations.

Continuous full-body coverage for controlled gowning
Low-lint fabric and enclosed seam configurations
Selectable cuff, ankle, hood and footwear interfaces

Request a Quote Browse Products

Product Introduction

The Cleanroom Coverall provides continuous torso, arm and leg coverage with enclosed seams and a front closure suited to controlled dressing procedures. Reusable versions can use lightweight continuous-filament polyester fabric, while disposable configurations can be specified in low-lint nonwoven material. Cuff style, ankle finish, hood interface and boot compatibility can be selected for the intended cleanroom protocol.

Key Features

Full-body coverage with a streamlined low-lint construction

Front zipper protected by a cover flap to limit exposed closure surfaces

Elasticated or knitted cuffs available for glove and footwear interfaces

Raglan-style or articulated sleeves support routine operator movement

Reusable and disposable material configurations available

Customer Product Concerns

A coverall can only support contamination control when its coverage, movement allowance and glove or footwear interfaces work as one gowning system. Material and construction also need to suit whether the facility uses controlled laundering or a single-use replacement protocol.

Personnel movement can release fibers and skin particles into the controlled area.Select a low-lint continuous-filament or cleanroom-compatible nonwoven construction matched to the contamination-control plan.

Poor cuff and ankle interfaces may leave gaps between garments, gloves and footwear.Configure elasticated, knitted or thumb-loop cuffs and compatible ankle closures for the specified gowning system.

Heavy fabric or restrictive patterning can reduce comfort during long shifts.Use an ergonomic pattern with adequate torso ease and articulated sleeves for routine bending and reaching.

Garment laundering or sterilization processes may affect fit and service life.Match reusable fabric, seam construction and labeling to the validated laundering or sterilization workflow.

Typical Applications

Suitable for semiconductor assembly, pharmaceutical production, biotechnology laboratories, medical-device manufacturing, optics processing and other controlled areas with defined gowning procedures.

Technical Parameters

These ranges cover configurable reusable polyester and low-lint nonwoven coverall constructions. Final fabric, garment dimensions, seam finish and interface details should be selected for the intended gowning sequence and operator size range.

Core Material	Continuous-filament polyester cleanroom fabric or low-lint nonwoven material
Panel Thickness	0.20–0.45 mm
Effective Width	500–760 mm per laid-flat garment section
Maximum Length	1950 mm
Steel Facing Thickness	0 mm; no steel facing used
Core Density	70–130 kg/m³ apparent fabric bulk density
Thermal Conductivity	0.035–0.060 W/(m·K), material dependent
Surface Finish	Smooth low-lint textile surface with enclosed or bound seams
Joint Type	Sewn and bound seams with covered front zipper
Customization	Available based on the intended application and operating environment.

Available Options

Reusable polyester or disposable nonwoven constructionWhite, light blue or other standard cleanroom garment colorsElastic, knitted or thumb-loop wrist cuffsOpen ankle, elastic ankle or integrated boot configurationIntegrated or separate hood interfaceIndividual identification and size labeling

Planning a Cleanroom Coverall specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team